Stator wire grommet?
- 1985 Honda 250SX
- 1985 Honda 350X
- 1985 Honda 350X
- 1986 Honda 250R
“I Love The 350x. It’s So Bad”
My Feedback Link!
What is that on? A cable?
90 nickolson Bored and Stroked "The Good"
Big Bore 110 Pauter frame "The Bad"
90 Bored and Stroked “vey’s frame” "The Ugly"
110 JSC frame Bored and Stroked
flat track build. “Shop trike”
1974 original 90 X 2
1974 Original 70.
Correct ..... it’s definitely a Grommet
https://www.ebay.com/itm/Yamaha-DT1-...MAAOxyLVZRX6De
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Found some reproduction rubber for a 250/490 IT which as near as I can figure should fit a YZ or a Tri Z give or take an extra hole.
Then I started looking for the black plastic sheath that most wiring you see exiting a stater cover pass-through. Once again I can’t seem to find anything, and I know that it’s got to be a commonly available item.
All that seems to be out there are the braided nylon sheaths. If any of you know how to search for the black plastic, vinyl or whatever it is please let me know.
"You should never smoke in pajamas..
You might start a fire and burn your face..
Maybe you should return to Manaugua..
You could go un-noticed in such a place"
FZ
Ass,gas or grass....nobody rides for free!
Ride free,Brotha. See you in Heaven.
Found this seller, thanks!
https://www.ebay.com/itm/PVC-Tubing-...l/142593392133
I have the high temp soft tubing. DAM shop showed a pic of the same site I used to buy it from, now I buy it direct from the manufacture (around 1500ft min order).
https://i.gyazo.com/d63309935dcce3af...ecbec55e5b.png
I have 6mm, 8mm, and 10mm. I've tried other suppliers, but the tubing is always super stiff and not soft like OEM. Only that high gloss tubing even comes close to OEM.
Here's a link to the store that I posted the link to the image of. Joe (the site owner) seems to be getting rid of the high gloss tubing.
http://www.cycleterminal.com/sleeve-tubing.html
I'd advise against heat shrink, most of them are rated for 60-80c for the shrinking temp, so normal usage temp should be lower than that. At least that's my view point on it.
If you're interested in redoing my harness from the stator plate to the first connector shoot me a PM with a price. I'd send you the stock parts as well as Ricky Stator ignition and lighting coils and the rubber grommet I just bought.
Shot you a pm =).
Use PS2 - He will make you a very nice harness, he found a great niche to excel in...
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Thing-a-ma-bob, dooma-hickie, watch-a-ma-call-it always worked for my dad.
MrC.