Activity Stream

I say take the free stuff, if they don't want you to wreck yourself for it. You ride better than you walk, coming from someone much younger that...

Yeah, I don't ride aggressively anymore like a lot of old geezers do, and I prefer to stay on top so I can ride another day. There is now over...

Right on you old geezer! Keep having fun but be safe....we are not 20 somethings anymore

You need to invest in a test light, ohm meter and download the service manual or at least the wiring diagram. hook up a battery or a battery...

I'm guessing you asked in hopes of a simple, low labor, magic answer. There isn't one for something like that. ATV shops won't touch it because...

Making very good progress on the 200X, I have a complete rolling chassis with brand new bearings all around. Brand new tires, handlebars, plastics,...

If you are bored and want a good laugh at my expense ��, check out this short video along with the comments. I was at Elsinore Saturday and a...

Right on man....thanks for the lead. Things are soaking in Kroil right now but I don't have high hopes for it....it's just a sense. I mean the...

Blaster penetration oil, don’t bust your knuckles: bust your nutz! 200x the best buddy bike ever made, anybody at beginner to expert level of...

While on the forks I've been contemplating the front caliper. My new budget is $2000. I feel confident I could have made my initial $1500 budget...

Clean the ground points as well!

If you want to get it running before you dump too much time or money in it, get a 12 volt battery and some cables. Negative to ground, positive...

I believe that the electric start models have a main fuse. That would be a place to start. After that, I'd check to make sure that the battery cables...

Thanks for the reply. I had no idea deck height was different. Wow, you saved me some grief there! Are the gaskets and piston the same though? ...

1 tube down 1 to go. All serviced & assembled & ready to go. I havent added ATF yet or zip tied that gator.... will do both of those when they...

The deck height on those cylinders are wrong , won’t work . This kit looks like it will work . If you have a place to over bore your cylinder...

Good Morning Everyone, This weeks video is all about new projects and saying goodbye to some old ones. What's your favorite Project? ...

Sorry to bump up an old thread, but we're working on my son's 1987 XL185 (Canadian model), and have found this thread with some good interchange...

I have back up 4 or 5 sets this year and installed proper shims, it's the 2nd best fix. I did one 10 years ago that still held up. $75 + shipping...

I acquired a trx200sx swing arm assembly, should not be too long until that's all hooked up. My plans is to still use the BR bearing carrier and...

https://www.youtube.com/watch?v=pyXq_qe3DAs were can i buy one for my bike?

I’ve been thinking about building a suspension 200 red for a while. I love the 200 big red, but my back doesn’t. Sent from my iPhone using...

I've been working on a dirt bike, at lot actually. The thing was a bit of a mess. Here's a couple things I've done. The carb is super easy to...

Internals of one fork all cleaned up and inspected. I'm going for a poor man's overhaul. Already have the seals and got o-rings that will...