Activity Stream

Very nice , love it

So glad we have it. She’s a lot of fun.

Hope you enjoy this booklet.

You can see here it was purchased with separate prices on each item but also says no charge.

This is what was in the duct tape below the gas tank. Should explain why the left case was cut to expose the front sprocket This ‘trail seat’ was...

Here is more of this ‘cat’. Got the unicorn seat in a box. These pics were the day we pulled it out. It cleaned up real nice and started...

^way over loaded;)

Well, 4 years later…I couldn’t let a good frame go down for the count.

Walk around. Still trying to dial it in.https://youtube.com/shorts/vNcMktGJVpg?si=Zj71DxrB_zf6DTSU

Yes Tim but tell him the real issue...the teeth are not matching up and worn. I back cut them measure and shim them. New spring and bingo no slipping...

Ok thanks for the help found out I have a 86 motor on 85 frame I been ordering wrong parts.

I went with a Mikuni TMR-28 carb, it’s been modified by Yoshimura and has some custom guts that Yoshimura designed. The frame hoop had to be cut and...

That is a common problem. There is a spring and a washer that goes internal to fix the issue. Look here for more info: ...

1986 stator 1985 stator

1986 1985

The stators and flywheels on the 86 are different from the 85. In your photo, the stator on the right is an 85 and the stator on the left looks like...

Hey man I was reading your post. I have a CRF230 engine in my first gen 200X. What carb and intake did you end up going with? Thanks

The suspension is certainly nice, as is the electric start and dual range, but those brakes take the cake. Will make riding steep terrain a lot...

Jamal aka BBC aka the bigred works runs drives stops....this thing is fun! The motor is the quietest 200 series Honda motor Ive ever had with a 1st...

This is the end of the trail and I don't think I seen this sign in any of the videos I watched. There are ruins from the rock cabin just a bit past...

Here's the actual map. Even the map on onX is wrong, and people pay for that app. The onX one only shows about half of the trail and none of the...

Hopefully that changes. You were really trying to help out 350X people. I had to edit. For some reason when I type o w n e r s, that STFU smiley...

IF, they're regularly maintenance. It's not a big job, and technically don't even have to completely remove the fork since they're loose balls, but I...

The OEM will last longer if installed correctly But the all balls bearings work.

hmm. all balls bearings =made in China Oem = made in Japan I prefer Japan:D shep