Activity Stream

If you want to get it running before you dump too much time or money in it, get a 12 volt battery and some cables. Negative to ground, positive...

I believe that the electric start models have a main fuse. That would be a place to start. After that, I'd check to make sure that the battery cables...

Thanks for the reply. I had no idea deck height was different. Wow, you saved me some grief there! Are the gaskets and piston the same though? ...

1 tube down 1 to go. All serviced & assembled & ready to go. I havent added ATF yet or zip tied that gator.... will do both of those when they...

The deck height on those cylinders are wrong , won’t work . This kit looks like it will work . If you have a place to over bore your cylinder...

Good Morning Everyone, This weeks video is all about new projects and saying goodbye to some old ones. What's your favorite Project? ...

Sorry to bump up an old thread, but we're working on my son's 1987 XL185 (Canadian model), and have found this thread with some good interchange...

I have back up 4 or 5 sets this year and installed proper shims, it's the 2nd best fix. I did one 10 years ago that still held up. $75 + shipping...

I acquired a trx200sx swing arm assembly, should not be too long until that's all hooked up. My plans is to still use the BR bearing carrier and...

https://www.youtube.com/watch?v=pyXq_qe3DAs were can i buy one for my bike?

I’ve been thinking about building a suspension 200 red for a while. I love the 200 big red, but my back doesn’t. Sent from my iPhone using...

I've been working on a dirt bike, at lot actually. The thing was a bit of a mess. Here's a couple things I've done. The carb is super easy to...

Internals of one fork all cleaned up and inspected. I'm going for a poor man's overhaul. Already have the seals and got o-rings that will...

Great thread and very nice work! I hope you post the whole build.

I'm having a hell of a time w this site? Can't upload images, can't edit my post and I'm getting random pop ups all over my screen when logged in?? ...

If everything goes good on this trip I don’t see why we couldn’t go again. I didn’t post there because seems like nobody ever goes on there. ...

I posted in the rides section about the Imperial Invasion coming up at the end of February. We'll be out there then if you want to make a second trip

Thank you. It’s all good. Sent from my iPhone using Tapatalk

I wish you a happy Birthday. Sadly this is on the wrong side of the continent for me.

Trying out postimage......see how it looks. A picture of some tidbits from the fork.

Anyone? Sent from my iPhone using Tapatalk

Already have a modified 85 atc200x. Already have a modified 86 trx200sx. There are many parts on these machines no one has. They were designed and...

I have put a 200e engine in a 84 200x chassis. I have even considered putting a 200x front end on a 200sx quad, that would give you a suspended shaft...

No clue. I have the a 300ex swing arm I can use to bolt together and get mounts parallel, digital angle finder, measure table, measure frame, set...