Activity Stream

200x has it as well but that one mounts under the triple, not in front. I guess I’ll figure it out when I run the wires down.

I have found a filter from a modern vehicle that will fit into the 250 big red airbox. I have ordered the cage for it. If this all fits I will...

I'm no 350Xpert, but the guide on the L side of the top triple clamp looks correct to me. As for the guide in the middle of the top triple clamp,...

Does that wire clamp/guide thing look to be installed correctly? I didn’t get a photo before I took it off and who knows if it was right when I got...

Thanks! I brought home the new U-nuts for the axle clamp. Once those are on I can mount the bars and get the front done. I’ve ordered Honda...

Looking good J!m.

Photo progress update

Many more OEM 85 fenders out there. Buy 86 is hard to find. For me anyway. So I was thinking to alter the shape of the rear mud flap and paint it...

I’m running the Maier fenders and the problem I now have is they look more like a raspberry red in contrast with my frame. Oh well it about the only...

My problem with Maire's fenders..........I can never remember how to spell it. Had to google it like many times before.... "Maier" it is i guess...

On the Maier, are you talking about the bend that simulates where the mud flap is on the OEMs ?. The Maier 350x fenders are better than their 250r...

I might try a LED bulb if I can find one that fits the tail lights.

I've been absent here, but busy regardless. Front end is going back together now. New Serwa tires mounted, triple going back together with rebuilt...

Scored a sweet AC grab bar to replace my stock one. Stock one had one too many wheelie overs on it hahah

Trying to post some pics haha. Got the frame back from powder coat and it turned out fantastic. I just reused the ball bearings in the...

The holes are in the middle of the lenses on both taillights. I have not taken these apart yet but I assume the bulbs are in the center of the...

Maybe this is good news for me…. “PROCRASTINATORS UNITE!”

See the f you can download the parts fiche. That, and the workshop manual help connect the dots where prior owners have taken “liberties” in Their...

I just refurbished a tail light that had a 20W bulb inside. It should be a 5W bulb and they are not easy to find.

I have never seen bulbs melt these as they can take quite a bit of heat. Is it clear as day that it is melted holes? Could it not be knocked out in...

^thanks for the help I appreciate it :beer

great ,thanks for the info

The front sprocket was held on by a clip that was bolted to the sprocket. I believe that they are discontinued. When I had my xr600, the front...