Activity Stream

Ok thanks for the help found out I have a 86 motor on 85 frame I been ordering wrong parts.

I went with a Mikuni TMR-28 carb, it’s been modified by Yoshimura and has some custom guts that Yoshimura designed. The frame hoop had to be cut and...

That is a common problem. There is a spring and a washer that goes internal to fix the issue. Look here for more info: ...

1986 stator 1985 stator

1986 1985

The stators and flywheels on the 86 are different from the 85. In your photo, the stator on the right is an 85 and the stator on the left looks like...

Hey man I was reading your post. I have a CRF230 engine in my first gen 200X. What carb and intake did you end up going with? Thanks

The suspension is certainly nice, as is the electric start and dual range, but those brakes take the cake. Will make riding steep terrain a lot...

Jamal aka BBC aka the bigred works runs drives stops....this thing is fun! The motor is the quietest 200 series Honda motor Ive ever had with a 1st...

This is the end of the trail and I don't think I seen this sign in any of the videos I watched. There are ruins from the rock cabin just a bit past...

Here's the actual map. Even the map on onX is wrong, and people pay for that app. The onX one only shows about half of the trail and none of the...

Hopefully that changes. You were really trying to help out 350X people. I had to edit. For some reason when I type o w n e r s, that STFU smiley...

IF, they're regularly maintenance. It's not a big job, and technically don't even have to completely remove the fork since they're loose balls, but I...

The OEM will last longer if installed correctly But the all balls bearings work.

hmm. all balls bearings =made in China Oem = made in Japan I prefer Japan:D shep

Thanks. Hardtail fork applications come up quite a bit, and I'll help when I can. I think there's basically four fork types used on the 185/200...

I bet that head gasket is fun. I would think it'd be easy to get to since the engine is so far forward, but I know there's a lot of stuff to remove...

Got both races out. Just had to keep beating on the frame one and heated front end one and was able to pry it up with a tire tool. Now I’m thinking...

Ok, I see now you are correct. Thanks for explaining it after all. Good day to you!

Sorry about that, I got sidetracked by a Rhino with a blown head gasket. The wheeler is an ‘83 Atc 200E. The forks are (I think) from an ‘86 Atc 185....

That is, for a fact, a 185S/200S fork. You're correct that is a E/ES. Doesn't matter though, the original E/ES fork top bridge won't work, it's...

I went for a ride on the Bear Creek trail yesterday, and glad I did. My previous assessment was wrong! It's a proper woods trail and has enough...

I don’t believe they are. Look at his photo. It’s appears to be an 83 or 84 big red. Those have a top bridge that has the holes spaced about 6” plus....

Those are 185S/200S forks. You didn't specify what model of ATC you have or if you're swapping from rigid to a suspension fork. Better information...

You've been heating what up? The race or the neck? Shouldn't be need for heat, but if you're applying it to the race you're fighting yourself. That's...

Hey, it’s been awhile. My old tundra is still around. 160k almost and not a one problem. I’ve had my Chevy express 20 yrs and just changed the...

Welcome…I believe you’re looking for 53231-958-020. That is for an 83’ atc 200 and 84-85 200m, all share the same top bridge. A helpful guy here...