10'' «0» offset front rim.

[Yamada]

Is there any quad that use a 10'' front rim with zero offset?
The bolt pattern is not really important because it will be for a custom application. The easiest way to do what I want would be a 10'' rim with a 3x100 bolt pattern but I'm 99% sure it don't exist.
Any help is welcome.

[MonroeMike]

Have you checked this chart?

http://www.mud-throwers.com/atv_wheel_chart

[Macs]

That chart sure will come in handy.

[Yamada]

Have you checked this chart?

http://www.mud-throwers.com/atv_wheel_chart

Yes, I checked this chart. But they are just listing the aftermarket wheel offset. They don't tell if the stock wheel is a 3+2 or 2.5+2.5. If someone have a couple of wheel kicking around and could take some measure for me it would be great.

[SWIGIN]

it'll be 5 lug but my 89 q-racer had 10s and i dont remeber them being offset much at all.

[Yamada]

it'll be 5 lug but my 89 q-racer had 10s and i dont remember them being offset much at all.

5 lug is not a problem.
I guess I need to find someone with a pile of wheels and start measuring.

I'll explain my plan a little better. I want to put a 10'' front wheel on my YTM-225DX. I'll find a machine shop and ask them to cut me a 1/4'' adapter plate to bolt the wheel on the spindle.

[SWIGIN]

ah

i did the same thing with a aluminum 9'' wheel on my 110.....good luck

[Yamada]

atc500x find me an first generation Tecate front wheel. Just have to pick it up and start play with it. I'll let you know how it goes.