Aftermarket ATC 70 wheels and tires

[Henry89]

I have a 1984 ATC 70 that I just bought a few weeks ago that I've started to rebuild. I will need to get some new knobby tires and possibly some wheels also. Not sure if I will just have the stock wheels sand blasted and re-painted or just get a set of aftermarket aluminum wheels. I'm trying to keep the cost down on the build so I'm not sure what it would cost to have the stock wheels sand blasted and re-painted. What are my options on wheels and tires that will bolt up to the stock 70 hubs? Here is what I'm working with:

http://i51.photobucket.com/albums/f381/RC_Feen/ATC70_Before014.jpg

http://i51.photobucket.com/albums/f381/RC_Feen/ATC70_Before013.jpg

I've found these aftermarket wheels and tires for the 70 that will bolt up to the stock hubs but they seem a little pricey! Know of anywhere else I can buy a similar setup?

http://www.sterdyproducts.com/productcart/pc/viewPrd.asp?idcategory=37&idproduct=44

Thanks!

[KASEY]

yep thats about what they cost... and i have not seen a used set sell cheap either,,, big demand,, the best i could do would be like $240 shipped too,,,

[BigHenault]

Do you have a part number for the rims ? i would like to order some locally thanks

[Henry89]

I was looking for the part number for the Douglas wheels and the correct size that I need for the front and rear. Need to findout what the 3-bolt spacing is also to order the correct wheel. Any info would be great.

[86trizinger]

wouldnt 300 ex hubs fit.. thus allowing you to use 4x110 wheels in the rear.
I have a brand new set of 4x110 8in wheels in my shed. About 8" wide.