PDA

View Full Version : rd500 vs. r1



factoryX
10-20-2009, 11:43 AM
:w00t: http://www.youtube.com/watch?v=zPOoYgnn3l0&feature=related

lndy650
10-20-2009, 12:16 PM
2 strokes rule...

oldskool83
10-20-2009, 04:41 PM
r1 will kill it, sorry i like liter bikes on the street.

lndy650
10-20-2009, 05:39 PM
my rm500 destroyed a cbr1000 up to 100mph and it dosent look like the r1 is killin it either... haha and the 2stroke is half the size

The Goat
10-20-2009, 06:14 PM
and no one comments that the rider of the R1 is shitty and let off rather than ride out first?

3 or die
10-20-2009, 07:35 PM
My last bike was a 94 r1. Most high power smaller bikes would stay close till 100mph, then they would start slackin off. The r1 is just gettin started at that speed. The thing wold run almost 70 in 1st gear before it would start banging the rev limit. You could start 100ph wheelies without slipping the clutch . That being said, if the r1 driver is scared and the other driver is good than you got a race. But you put a good driver on the two the r1 is gonna pull away and leave it behind at high speed.

oldskool83
10-20-2009, 08:09 PM
they didnt make r1's in 1994...you had a fzr1000...2 different animals r1 came out in 98.

hawaiirider
10-20-2009, 09:47 PM
My last bike was a 94 r1. Most high power smaller bikes would stay close till 100mph, then they would start slackin off. The r1 is just gettin started at that speed. The thing wold run almost 70 in 1st gear before it would start banging the rev limit. You could start 100ph wheelies without slipping the clutch . That being said, if the r1 driver is scared and the other driver is good than you got a race. But you put a good driver on the two the r1 is gonna pull away and leave it behind at high speed.

good topic!! i agree w you thow, if it were two pro dragracers the safe bet is the R1 for sure.

factoryX
10-21-2009, 12:19 AM
hehehe, http://www.youtube.com/watch?v=iIQ9nMn9aCA&feature=related

http://www.youtube.com/watch?v=SARVvPck5tA&feature=fvw

http://www.youtube.com/watch?v=7lU7wEycgeU&feature=related

factoryX
10-21-2009, 12:39 AM
Stock Busa hp on this RG500 suzuki. 146hp RG500: http://www.youtube.com/watch?v=oEOGYI7wUlU&feature=related

lndy650
10-21-2009, 01:14 AM
ya 146hp out of a 500 says it all 2 strokes rule

factoryX
10-21-2009, 01:15 AM
yeah here is more backup for me to say that 4 strokes suck, watch it and weep!: http://www.youtube.com/watch?v=FbzQpZ7gFfo&NR=1

lndy650
10-21-2009, 01:49 AM
that vid was an instant favorite..

factoryX
10-21-2009, 04:35 AM
point of this thread is that a 1000cc r1 has 50 more hp than a 500cc 2 stroke street bike stock for stock...

The Goat
10-21-2009, 08:30 AM
but how do you factor in the little suzuki 4 strokes that can easily touch 160hp?

Idk how much they weigh, but I know that was the first...and LAST streetbike I ever through a leg over.

oldskool83
10-21-2009, 10:03 AM
my rm500 destroyed a cbr1000 up to 100mph and it dosent look like the r1 is killin it either... haha and the 2stroke is half the size

if it was not a 1000rr you will kill it down low. r1's also have nothing down low untiler after 100ish and also most riders cannot handle the power of a liter bike let alone a geared on.

in an all out maxed out race regaurdless of distance they will kill.

lndy650
10-21-2009, 12:31 PM
all that matters to me is 0-100 or 1/4 mile. i could care a less what some bike does at super sonic speed because im never going to want to go over 100 or so. ok i lied i like to go fast but i say 0-100 is where it counts. on a twisty track a 2 stroke half the size will destroy a 1000. and they weigh half as much

oldskool83
10-21-2009, 12:37 PM
well duh! gotta explain what conditions, helps alot in arguring haha.

up on youtube there is a vid of me racing my friends 04 r1, well def over 100mph...ive hit 100mph wheelies with a passenger on back...vids on you tube also hehe.

fabiodriven
10-22-2009, 10:06 AM
I don't think they ever made an RD 500. My guess is that's probly an RZ.

hondawasaki
10-22-2009, 11:26 AM
Here ya go

oldskool83
10-22-2009, 11:38 AM
they made and rz500 also, but i looked the same from what i remeber, i dont recall the differeanced between the 2

fabiodriven
10-22-2009, 11:46 AM
I stand corrected.

Tri-Z 250
10-22-2009, 12:55 PM
They outlawed plating the RZ500 in the States, as I remember. I recall people imported them via Canada...and putting Hostoric/Collector plates on them. I don't remember the above RD but was that the privious TAG before RZ?

factoryX
10-22-2009, 03:28 PM
2 different bikes. rz500r was power valved.

z400guy28
10-23-2009, 08:17 PM
Did anyone notice when his bike is being dynoed he does not show the actually dyno reading on the monitor like he did on everyone elses bike.Also anybody can take a piece of paper and print some dyno numbers on there computer.They way i see it is if it's a 2 stroke or 4 stroke, if it runs good doesn't break down on ya and is fast as hell who cares what cycle engine it is. As long as it rips is all i care about.

Thorpe
10-24-2009, 02:04 PM
I would love to run one against my 929rr

HondaHarry
10-26-2009, 09:55 PM
they made an RZV also. same as the RZ, but had an aluminum frame. HH

fabiodriven
10-26-2009, 11:19 PM
they made an RZV also. same as the RZ, but had an aluminum frame. HH

Now that's something to get a bulge in your pants over...

lndy650
11-06-2009, 09:08 PM
^ Hell ya i want one!!!!

3 or die
11-06-2009, 11:44 PM
they didnt make r1's in 1994...you had a fzr1000...2 different animals r1 came out in 98.

it was a 2004, all black red flame

lndy650
11-08-2009, 07:54 AM
in your previous post you said 94shens

factoryX
12-19-2009, 04:25 AM
found some more vids against a r1, this time its a yamaha tz250 gp bike, its really close!
http://www.youtube.com/watch?v=OL7ZbomydgI&feature=related

factoryX
12-19-2009, 04:39 AM
and here a tz750 flat tracking!
http://www.youtube.com/user/suzukijo#p/a/u/1/18cSvc8L9zg

factoryX
12-20-2009, 12:37 AM
another rg 500 video!'
http://www.youtube.com/watch?v=AZr-PncUjnk
http://www.youtube.com/watch?v=NzLWAGP76aA&feature=related

Twilight
12-20-2009, 05:37 PM
I can say that my NSR250RR will kill a CBR600RR on track and streets here in Seattle..

And all my friends laughed when I bought my NSR, " a 250r.. wow you can even ride a big bike, and look at those little pipes!"

lndy650
12-20-2009, 07:03 PM
^^^haha hell ya!!! that says it all 2 strokes win discussion OVER!

factoryX
12-21-2009, 05:54 AM
I wondered what a tz750 would do in a more modern bike like the r1. problem is it looks like the cranks in these where messed up from factory and like to break. and to break one is loosing the motor entirely. Good luck finding another crank. thats why this:http://www.twostrokeshop.com/TSS1100GP.htm is a better place to start with..