hey hondaatc or howdy

[yamaha200E]

what size jet do i need for my ytm83 200E so i can put a pipe on it? thanx kyle

[TimSr]

You put the pipe on it, run it, read your plugs, and THEN decide if a jet change is in order. No one can answer the question you have asked with anything beyond a wild guess.

[MR ATC]

either a boeing 747 jumbo jet or a Dougless DC-9


in all seriousness howdy, Billy, or anybody else for that matter can not jet a trike over the internet. the best they can do is tell you what works in there own conditions. there are many factors involved such as...altitude you ride at, atmospheric pressure, humidity, what brand of pipe it is, other modifications to the machine. what you should do first is run it with the jets you have in there now and take some plug readings. then you jet the trike accoring to that. as far as how to jet that is a long explanation and i will get into that latter in my TECH TIP series i'm working on.

[Howdy]

I wished I knew. I don't even know the stock size. :P

SORRY!!!
Howdy

[yater]

Do yourself a favor and listen to them. I changed my jet (upsized) on my big red when I put a new pipe on (even before a test run) and it ran way too rich. I went down one size which was a size above stock and it runs like a top. You may need to go bigger but check plug first.

[yamaha200E]

ight thanx guys. kyle