quick atc200 topend gasket question

[litebulblsc]

http://i99.photobucket.com/albums/l295/litebulblsc/bbc019-1.jpg

1. Pulse Generator Base Gasket
2. Cylinder to Block Gasket
3. Head Gasket
4. Pulse Generator Cover Gasket
5. Exhaust Gasket
6. ?
7. ?
8. ?
9. Pulse Generator Base?
10. ?
11. ?
12. ?




Not sure where all those darn o-rings go.
My guesses are 6, 7 and 8 are for intake and valve adjusting caps
Then 10 and 12 are for the head dowels?
No idea about 11. Looks like the timing peek hole, but that is on the bottom end. Any help?

Thanks,
Josh

[85Tecate]

http://i99.photobucket.com/albums/l295/litebulblsc/bbc019-1.jpg

1. Pulse Generator Base Gasket
2. Cylinder to Block Gasket
3. Head Gasket
4. Pulse Generator Cover Gasket
5. Exhaust Gasket
6. ?
7. ?
8. ?
9. Pulse Generator Base?
10. ?
11. ?
12. ?




Not sure where all those darn o-rings go.
My guesses are 6, 7 and 8 are for intake and valve adjusting caps
Then 10 and 12 are for the head dowels?
No idea about 11. Looks like the timing peek hole, but that is on the bottom end. Any help?

Thanks,
Josh

The black orings are valve adjuster caps and carb/intake oring. Im pretty sure your right about number 5 also. Just because it says top end kit doesnt mean you wont get a gasket or 2 for the bottom end also. You have to use the timing adjuster so thats why the new gasket is there. Ive never seen the little blue orings....... and ive rebuilt alot of these. Usually theres valves seals but i dont see those either.

[rdlsz24]

You need one of the little green ones for the head oil dowel like you guessed. They just gave you 2 to have a spare I guess. Is this a Vesrah kit?

Rob

[litebulblsc]

Yes this is a Vesrah kit. The valve seals aren't pictured because I already installed them last night while I had access to a valve spring compressor.