1985 atc 110 frame

[want250r]

hi everybody, i'm a newbie on here. i have a 1985 atc 110 with a bent frame. it's not bent real bad, but i want it to be right. will 110 frames from other years work or will i have to stick with an '85? thanks.

[shortline10]

84/85 110 frames are the same . not sure but a 125m might work to .

[MonroeMike]

Welcome to the board.:beer

[harryredtrike]

welcome to 3ww,keep us posted and get pics

[want250r]

thanks everybody. i have to figure out how to post pics but it's nothing special. just got it about 2 weeks agofor my kids and i to play on. hasn't ran for a long time. runnin' like a top now. new tires , exhaust, carb rebuild, float, throttle cable. once i get a different frame, i would like to put a cam in it maybe. i used to have a 1985 200x about 6 years ago, and that's what got me back into it. it's addicting! i wish i still had it.

[want250r]

i hope this works!

[ilmoakw]

Looking good man!

[1985BigRed250ES]

if its not bent too bad, i would just ride it the way it is. my 1980 ATC 110 that I recently restored/refurbished has a bent frame also. I cant afford a frame right now, so I went forward with the bent frame. It rides and handles good, really cant tell that its bent other than how the gas tank sits on it.

[MonroeMike]

Looks pretty good. How bad is the frame bent?

[want250r]

i didn't think $100.00 was too bad for it. it does ride and handle good, but if you look at the front forks it looks like the steering stem on the frame is slightly tweaked. also, on the rear right hand side it looks bent a little, in front of where the bearing carrier for the rear axle mounts. i was wondering if this is why the axle looks offset from one side to the other.