PDA

View Full Version : Yamaha 225dx questions



johnny5
01-26-2010, 01:30 AM
I just bought this three wheeler and need some help It wont start with a battery hooked up normally but if i hook right to the starter it works checked the solenoid and it works check the switch on the bars and it works check the wires and one fuse for issues nothing any ideas? Any help would be Awesome

MonroeMike
01-26-2010, 01:53 AM
Welcome to 3ww.

Check and clean the connections, from the battery forward (don't forget the ground wire).

There's a manual here.

http://72.52.143.80/~trikes/ytm200&225-fm200_clymer_manual.pdf

johnny5
01-26-2010, 03:11 AM
Thank you! I'm sure like my pwctoday account my post count will grow within no time That was just what I was hoping for thank you alot hope I may be able to help you out someday.

johnny5
01-30-2010, 12:10 AM
Anyone know where I can get a pull starter assembly for this?

Mackee
01-30-2010, 12:40 AM
I have a cover but no internals, you need the whole thing?

Mackee
01-30-2010, 01:01 AM
Johnny5 here is another link I found...

http://http://www.3wheelerworld.com/showthread.php?29641-Attention-all-Yamaha-YTM200-YTM225-owners!!&highlight=YTM225

code200k
01-30-2010, 01:23 AM
if the ytm 200 pull starters swap over i got a comp. one

big yeller
01-30-2010, 02:19 AM
his should have a comp release cable

MonroeMike
01-30-2010, 04:15 AM
Johnny5 here is another link I found...

http://www.3wheelerworld.com/showthread.php?29641-Attention-all-Yamaha-YTM200-YTM225-owners!!&highlight=YTM225

225dxman
03-07-2010, 11:05 PM
I have a cover but no internals, you need the whole thing?

is bolt in it not stripped would u ship it