3wheeledjunkie
02-09-2010, 11:37 AM
We finally got enough snow here to do some donut ripping and sliding. Got the 110 out first, still starts on first pull thanks to needel relocation. Did some sliding, donuts, wheelies. Put her up and walked inside, as I opened the door the bars on my 185S caught the door handle and swung towards the door. Just begging to be ridden, I thought what the heck (it really only needs a rear handbrake cable). Took me 15 mintues to squeeze it threw a 36 inch door. But got it outside, adjusted timing chain, and it rips like crazy, even with the BlackWidows, it slides and turn much better than the 110. Has so much more power, but the fun ended soon as I don't have a idle screw adjuster and it fouled the plug. Needs to be leaned out, puffs black smoke alot. So gonna have to borrow the shops adjuster. Also, have any you guys eer had a pull starter not return only to loosen the bolts and have it suck back in. I find if I leave the bolts loose, or only seat them, it works fine. But tightening them up all the way makes it not return. PLus one of the bolts is broke off the lower/ farthest foward msot bolt and don't have a long enough one for the lowest bolt.