Tiger rim help

[snowhoundxp]

Just wondering if anyone knows where to get rear tiger rims. Just got new tires 22x11.00-8. Old rims are a little beat up and bent. That size is close to what's on it 22x12.00-8. They said that they would work. Just wondering about bolt pattern and size. If a4/4 3+5-10x8 would work. Thanks in advance for any assistance.

[Vealmonkey]

I don't really think they are Tiger rims. I'll check the 500 when I get home. I thought the bolt pattern was for a tecate.

[HondaHarry]

The size you listed should work fine. Rear Pattern is the same as 84 Tecate and most Golf Carts, and some older Polaris Quads. 4x4 inch spacing 1/2 inch stud. There are a few out there with 4x110 mm hubs but they have the 4x4 pattern drilled in them also. pretty common wheel, should be able to find them in 8 inch fairly easy. HH

[Yamaha_Rules69]

Most of the 4x4 bolt pattern rims that I know about are on a 10 inch rim, and this is what the 84 tecate used from the factory, along with a lot of earlier polaris atvs. I know the kawasaki klt 110 must use the same 4x4 rim, because I used a hub set from the k110 on my tecate, so im thinking the 110 also had a 8 inch rim that would work for you? Theres one idea for you.