View Full Version : help
farmboy kxt86
02-28-2010, 10:18 PM
:wondering took the 86 tecate 3 out today rode around for about ten minutes , then cut if off to let other friends get get their bikes off the trailer. when i went to crank it it wouldnt do a thing, checked the plug and it wasnt firing. where do i start,(stator,igniter,or coil) sumbody please help!!!:mad:
fabiodriven
02-28-2010, 10:20 PM
These machines are known to have stator/flywheel issues. I would start there.
farmboy kxt86
02-28-2010, 10:28 PM
if thats it what kind or name brand would you replace it with?
farmboy kxt86
02-28-2010, 10:36 PM
also when i was checking it for a spark , sumtimes it would spark but was veeerrrryyyyy weak when i could eventually get it to by kicking it over bout 20 times really fast
3wheelmecca
02-28-2010, 10:42 PM
possibly a worn out coil, it looks like the saturation effect has faded. is the coil/stator original or replaced?
farmboy kxt86
02-28-2010, 10:50 PM
both original the stator cover did have some condensation in it also when it was taken off
dcreel
02-28-2010, 11:22 PM
Check your grounds and connections for your electronics. You might check your kill switch as well. Unplug and replug your connections.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.