Can 3 wheeler hubs work on a 4 wheeler

[Banage]

I just got my Warrior out of the garage and I'm going to get it running for this weekend. The tires are next to junk, but the tires on my trike are great. What's the odds I can take my Honda 200 tires and put them on my Yamaha Warrior. The tires are different sizes so I would have to swap rim and/or hub and all. If it fits, do I risk blowing out my clutch from the extra stress? Or the axle spline?

[RodKnockRacing]

im pretty sure the hubs will not fit yamaha splines would be different then honda but i could be wrong if the warrior hubs are 4/110 the rims on the honda should fit im not sure what the offset of the warrior hubs would be they maybe 4/110 or 4/115

[oldskool83]

banshee hubs fit on 81-84 250r, 83-87 200x 85/86 350x, if the hubs are the same as warrior then yes. i dont like yamahas bolt pattern so i'd use 4x110, thats standard.

[Banage]

Thanks guys. I'm going to try it tonght. I'm just seeing if anyone has done this before or knows about it.

[Banage]

The answer is no. I could get them on with a hammer no prob, but im not going to do that much damage. I dont care about the hubs, I got a spare set its the axle I dont want damage.

[oldskool83]

i have a spare 200x hub and 185s hub with no spines you can have for the cost of shipping if that helps you

[Banage]

Not sure. My 200 has a larger rim so the lug holes are more spread out. I think any hub that fits my axle will not fit my rims. I'm going to rebuild the carb tonight and if it runs like I think it will, I guess I will start tire shopping.

[SWIGIN]

banshee hubs fit on 81-84 250r, 83-87 200x 85/86 350x, if the hubs are the same as warrior then yes. i dont like yamahas bolt pattern so i'd use 4x110, thats standard.

Just so people don't get the wrong info.......85-86 350x has 25 spline hubs and will not fit 200x/early R,185 or any other 24 spline axles.