gas tank

[dirtbasher]

can anybody tell me how i can remove a dent from my gas tank???

[Lots_Of_Nothing]

plug the gas lines and blow into the top, or take a stick or metal rod and try to pry it out from the inside

[86waterpumper]

fill with water, place cap on, and put in freezer overnight :shock:

[skippy]

i second that frozen water theory.. it will work..

[Mobular]

Do the frozen water method gradually. You don't want it to blow the seams. Leave about 2 inches of space from the top, and check ot every 2 hours to make sure that it isn't over expanding.

[Ace Mon]

remove the tank and put the petcock in the off position . Cook up 2 cans of stag steak house chili . Put some vasoline around the filler neck for a good seal . Place the tank on the ground . Eat the chili and then sit on the fill hole and fart . It worked for me :)

[samster143]

Use compressed air... Plug the holes, petcock and breather hole on top of cap, and pressurize to about 100-125 psi.....ding,ding,ding....no dents!