ATC200, ATC200M and ATC200S Technical Data

[Louis Mielke]

You can view the page at http://www.3wheelerworld.com/content.php?264-ATC200-ATC200M-and-ATC200S-Technical-Data

[2Tim215]

Nice link! Thanks...

[chrisk121]

does any buddy starting point on the 84 200s for carb has keihin has a screw on the side plus needle type screw in the middle going up to the carb body I don't know much about these ol 4 strokes but my kid got this 3 wheeler given to him it is in excellent shape usually starts right up but when you shut it off it wont start again unless you pull plug and clean usually wet when he pulls it out also when choke is on is throttle body flap closed or open thanks

[poppanitrous]

does any buddy starting point on the 84 200s for carb has keihin has a screw on the side plus needle type screw in the middle going up to the carb body I don't know much about these ol 4 strokes but my kid got this 3 wheeler given to him it is in excellent shape usually starts right up but when you shut it off it wont start again unless you pull plug and clean usually wet when he pulls it out also when choke is on is throttle body flap closed or open thanks

There is a plastic choke lever on the left side of ATC. put the choke on and see if it idles up or if it dies. Sounds like it is running rich and getting wet or if it is oil then look to rings or valves.

[wheelz420]

its the first time really trying to start it after putting it back together the guy i got it from gave it a paint job then got sick so i got it cheap but had a lot of work to invest luckily a friend sent me the manual and i got it together in one day. http://www.youtube.com/watch?v=nD5NJfb1FnM

[wheelz420]

waitin on the ratchets and ratchet springs n clip that all go to the pull rope assembely.should have the money soon to get them then ill be able to test drive it. cant wait

[wheelz420]

help please !!! anyone????
http://www.facebook.com/profile.php?id=631043488#!/video/video.php?v=482342233488

[wheelz420]

got it goin perfect the needle connected to the throttle line was put in wrong by the previous owner so it would hold it open heres its first running vid http://www.facebook.com/video/video.php?v=485081433488&comments love this thing

[mirthgrinder]

got it goin perfect the needle connected to the throttle line was put in wrong by the previous owner so it would hold it open heres its first running vid http://www.facebook.com/video/video.php?v=485081433488&comments love this thing

Are you addicted Yet???

[trikez-youngin]

yeah mine was like that but when i got it back from the shop I still had to roll start it. we fixed it though. its addicting and I love poping wheelies with the touch of the throttle.

[wheelz420]

my new toy for my honda 200
http://www.facebook.com/photo.php?fbid=486911303488&set=a.305031523488.147788.631043488

[wheelz420]

100% addicted

[zackwhite]

can any1 give me some help.i got a biek and i think i might have 2 or 3 bikes in 1.the motor it pull and no high or low.isnt that just the atc 200.and the muffler is just over the rear end and i think thats a 200s if im right.that wood make the frame 200s..i just dont n o.and i need some1 to give me some help with clutchs.i dont no how to do them as in set them.

[wheelz420]

can any1 give me some help.i got a biek and i think i might have 2 or 3 bikes in 1.the motor it pull and no high or low.isnt that just the atc 200.and the muffler is just over the rear end and i think thats a 200s if im right.that wood make the frame 200s..i just dont n o.and i need some1 to give me some help with clutchs.i dont no how to do them as in set them.


http://oscarmayer.net/atc/manuals/ injoy

[wheelz420]

keep us updated

[wheelz420]

heres a day vid of mine starting up and doin a few laps round the back yard ,i need to get some 200 plastics for it but the 185s plastic fits it just fine and i also have a extra big red plastic that came with it but looks like hell (needs paint) http://www.youtube.com/watch?v=yvjWpSPNvP0

[wheelz420]

took it to the street today for a few minutes and hit 3rd gear http://www.facebook.com/video/video.php?v=493512438488

[wheelz420]

http://www.facebook.com/video/video.php?v=497288773488&comments plowin

[MonroeMike]

You should start your own thread in Trikesylvania.

[wheelz420]

oh dude ratfink on a 3 wheeler bomb azz stuff here another vid of me plowin today in the blizzard http://www.youtube.com/watch?v=H6wJ6QHFfCQ

[wheelz420]

build a plow for a honda atc measurments and video http://www.youtube.com/watch?v=2i44PzOPs54

[3500gt]

anybody know how i would be able too put a differnt size tire for the front end? one thats not soo wide and bulky? i just hate having all that sloppyness up front and the tire is junk. so it needs replaced anyway.

[Wandy67]

so is the rotor, pulse coil, spark advanced system all the same for the 200, 200m, 200s engines?

[Bigbang]

http://oscarmayer.net/atc/manuals/ injoy
Thank you. This is very helpful

[KBTRI]

Hey guys! I have what I thought was a 1982 ATC200. It has a round headlight (did they do that ever?) and the odd thing is when I run the vin it says it is a 1980 model. Didn't think they came out that early. Anyone have any thoughts/wisdom on this?

[briantutt]

So I just resurrected a 200S from the dead. It is a 1984, runs great now but it shifts backwards??? Meaning all gears are down from N thru 5. The 1986 model I had when I was young as all up from neutral. Is this correct or is something assembled wrong inside the clutch side to make it behave this way. Does anyone know if these shipped from factory with the down shift pattern?

[shortline10]

85 and up are up shift , Honda changed to up shift for child safety reasons .
A young child can shift a transmission easier pushing down .