atc500x
03-12-2010, 11:22 PM
I'm starting the built of a ATC70X,from a sl70 frame,I'm planing to built a reverse kick system
The swingarm is built with some parts of a 200x swingarm.The bearing cage been shortened to fit the atc90 or 110 axle,not sure.The disc holder is from the 200x,the disc is from a scooter,the bolt pattern is the same.....I built excentric adjuster on the swingarm pivot,to adjust the chain.The shock is from a 83 cr80.The front....triple clamp is from a suzuki rv90,shock are from a honda ST90.The rv90 clamp need to be modified to fit the bearing on the sl70 frame,the tire fit perfect in the fork.
I cut the frame and change the fork angle,the sl70 frame give 8 more degree,now I have 2 more degree compared to the stock atc70,this will help for clearance between tire and motor since I have suspension.Stock the atc70 have 35inch between the center of front and rear wheel,now I have 36 inch.....the stock sl70 frame give 39 inch.
I will install a 4 speed manual clutch motor,a custom built motor from many honda parts....
Can wait to ride it!!!!
The swingarm is built with some parts of a 200x swingarm.The bearing cage been shortened to fit the atc90 or 110 axle,not sure.The disc holder is from the 200x,the disc is from a scooter,the bolt pattern is the same.....I built excentric adjuster on the swingarm pivot,to adjust the chain.The shock is from a 83 cr80.The front....triple clamp is from a suzuki rv90,shock are from a honda ST90.The rv90 clamp need to be modified to fit the bearing on the sl70 frame,the tire fit perfect in the fork.
I cut the frame and change the fork angle,the sl70 frame give 8 more degree,now I have 2 more degree compared to the stock atc70,this will help for clearance between tire and motor since I have suspension.Stock the atc70 have 35inch between the center of front and rear wheel,now I have 36 inch.....the stock sl70 frame give 39 inch.
I will install a 4 speed manual clutch motor,a custom built motor from many honda parts....
Can wait to ride it!!!!