taking out a lug nut bolt?

[portland250r]

my last post i deleted so i can put pictures up for an example.
i really need help so if you know how then help would be nice.
92704
92705

[atc350xer]

Are you trying to remove the stud? Heat and beat...

[portland250r]

k thanks.
im hoping this will work for a 250r rear hub.

[250rAL]

I wouldn't beat on it. I used a press to get mine out but a good size vise would probably work. Just put a socket slightly larger than the "head" of the stud against the back of the hub, put it in the vise and press the stud into the socket.

[Kintore]

I wouldn't beat on it. I used a press to get mine out but a good size vise would probably work. Just put a socket slightly larger than the "head" of the stud against the back of the hub, put it in the vise and press the stud into the socket.


ditto, when I put wheel spacers on my spare 85 R I did this method with a 20 ton press. Worked great. I wouldnt beat on it either