atc110 rear bearings help

[longboardnj]

im redoing the rear bearings on my atc110... do i need the oem o rings??? see item 19 and 20 http://www.ronniesmailorder.com/fiche_section_detail.asp?section=116648&category=ATVs&make=HONDA&year=1985&fveh=2784

[longboardnj]

wow noone ever replaced rear bearings on a 84-85 atc110??? all the rebuild kits dont include the orings so i was thinking i dont need them ... i was hoping people did this job without using oem orings and everything worked out perfect... any help would be great thanks

[longboardnj]

noone changed rear bearings on 84/85 atc110????? is there another forum that can help????

[riverrat]

I would just change them. I am about to do mine soon. Keeping water out is important. Lube them up with a good silicone grease too.

[1979ATC110]

Yeah, I did mine last year. You'll need the seals, otherwise they'll be full of crap in no time. A few ebay sellers sell the bearings and seals together.

[goodgreenbandit]

if they're just orings, buy the same size. Unless they're a special shape? An o-ring's an o-ring, as far as I know. Good Luck!!

[longboardnj]

i am getting bearings and seals... the seals will keep the water out.. im talking about the orings inside the bearing...... see item 19 and 20 on this link http://www.ronniesmailorder.com/fich...1985&fveh=2784 .. all the atv rears i rebuilt did not have 0rings there so i thought it was a part proven usless...

[Pafrig]

or you could just get sealed bearings.

[1979ATC110]

Your ronnies link dont work. The kit I got just contained sealed bearings and seals.

[longboardnj]

Your ronnies link dont work. The kit I got just contained sealed bearings and seals.

http://www.ronniesmailorder.com/fiche_section_detail.asp?section=116648&category=ATVs&make=HONDA&year=1985&fveh=2784 this should work... did you put your kit in??? if yes all is good????

[longboardnj]

or you could just get sealed bearings.
is this why companys like all balls dont come with orings cause they are sealed bearings and oems are not sealed?

[1979ATC110]

Yeah, I put my kit in - still all good. It included number 17 and 34 from that link.

[longboardnj]

Yeah, I put my kit in - still all good. It included number 17 and 34 from that link.

yea thats what i thought ... 79 is a bit different set up ...85 110 looks like you would need to put the bearings in with the axle on so you dont loose the 0rings... i dont plan on using the orings... i been busy with work ,i plan on doing the job as soon as i get the chance.. thanks everyone for the help ... if anyone has redone 84,85 atc110 please let me know how it went,if you used the orings or not??