my 83 250R

[250rJAMIE]

I've been re-doing my 83 250r for the past few weeks I got bored with the looks of it and I wanted to do a few things to it.I have been through about 4 different used carby and kept having problems with them so I bought a brand new mikuni tmx38mm carb.The pivot roller bearings needed replacing and 2 of the bolts on the cylinder were stripped out so I had heli-coils put in it and had the head decked flat cause it was warped a little.
Heres what It looked like before....
http://i134.photobucket.com/albums/q87/blaster_021/DSC01479.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01531.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01533-1.jpg

and some polished bits and pieces.I only polished it all by hand since I was low on money and couldnt afford to buy any polishing wheels for the drill.
http://i134.photobucket.com/albums/q87/blaster_021/DSC01544-1.jpg

The frame had a few cracks appearing here and there so I welded them up,removed the airbox mounts,tail light brackets,and the clips that the rear brake line clipped into cause they were broken
http://i134.photobucket.com/albums/q87/blaster_021/DSC01539.jpg

sanded all back and undercoated
http://i134.photobucket.com/albums/q87/blaster_021/DSC01546-1.jpg

and painted.....Glow Yellow!
http://i134.photobucket.com/albums/q87/blaster_021/DSC01556.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01562.jpg

the start of slowly pieceing it back together
http://i134.photobucket.com/albums/q87/blaster_021/DSC01567.jpg

[250rJAMIE]

http://i134.photobucket.com/albums/q87/blaster_021/DSC01576.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01574.jpg

back on 3
http://i134.photobucket.com/albums/q87/blaster_021/DSC01582.jpg

New carby I bought from america
http://i134.photobucket.com/albums/q87/blaster_021/DSC01584.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01581.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01589.jpg

The rear plastics are painted so I hope they hold up..They were sanded back I used primer filler for an undercoat and automotive gloss white for paint with a few coats of clear over it
http://i134.photobucket.com/albums/q87/blaster_021/DSC01595.jpg

motor back together
http://i134.photobucket.com/albums/q87/blaster_021/DSC01608.jpg

almost back together
http://i134.photobucket.com/albums/q87/blaster_021/DSC01620.jpg

and what it looks like as of now
http://i134.photobucket.com/albums/q87/blaster_021/DSC01624.jpg

...still got to clean and paint up the header pipe and play around with the jetting.I've been working lately doing some volunteer/training work so I've been busy with that and have been getting home late in the afternoon to fully finish it so hopefully It should be all done this weekend then if the skies clear up I can take it down the park and get some good shots of it... :):)

[dirtbiken]

real nice bike man, I would love to have it!

[RodKnockRacing]

that is one awesome bike great work

[Swanny224]

We just put our 83 together, getting that shock in took us around 4 hours. We couldn't figure out how the hell it fit in. But we got it, now we just have to tighten it back up and get a piston, then it'll be ready to ride.

[harryredtrike]

looks great jamie,could'nt let Ben show you up huh.

[250rJAMIE]

looks great jamie,could'nt let Ben show you up huh.

haha yer couldnt let him show me up..

Heres some more pics I took today,I want to get some new yellow grips and a black seat cover but til then I can call it finished!

http://i134.photobucket.com/albums/q87/blaster_021/DSC01631.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01634-1.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01635-1.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01638-1.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01637-1.jpg

http://i134.photobucket.com/albums/q87/blaster_021/DSC01636-1.jpg

[250rJAMIE]

Got bored last thursday and decided to pull my 250r down for the thousandth time since the pics above I have rebuilt another motor,different frame/swing-arm,whole new front end and a whole lot of other parts eek...I think I have just about replace everything in this trike since I got it in late 2008.while it was down I decided to rebuild the top end since it was a little low on compression,Also finally got a straight rear axle since the one in it was bent from me smacking into a tree last year and flipping it several times lol.It goes quite well now and is all ready for the dunes again this sunday!

this pic was taken a few weeks ago
http://i366.photobucket.com/albums/oo105/ForeverThreeWheels/100_8000.jpg
http://www.youtube.com/watch?v=r1lbf9zcLlU
http://www.youtube.com/watch?v=Q9ZlH9xEu7s

and now....I got the rear fender of mart its made out of fibreglass made by greenhuman about 5years ago I think mart said..Its even sporting some 3wheelerworld stickers on it :w00t:
http://i134.photobucket.com/albums/q87/blaster_021/DSC02090.jpg
http://i134.photobucket.com/albums/q87/blaster_021/DSC02091.jpg
http://i134.photobucket.com/albums/q87/blaster_021/DSC02089.jpg

[sx250heath]

Nice, very nice. I like the yellow frame its very unique.