Where to get piston rings, XR 200 / 200x?

[TheRealFatShady]

I got my xr200 engine apart, piston rings were letting oil by. Cylinder walls look real good, no need for hone/bore (may hone it as a precaution).

Using a mic in a few spots, it looks to be 2.57900 in = 65.5066 millimeters. Stock size was 65.5mm, so that works good. (I guess .06 or less is good / within tolerance; I'm only .01 or less away)

Where can I get honda rings? I was told wiseco rings won't work, and my piston is a honda one. Maybe an oversized kit for the X will work? (65mm stock?)

Also for a head gasket, will any ATC 200 one work, even if the cylinders are slightly different? I'd use a 200s or even re-use the XR as it slid off complete without issue.

Thanks

EDIT: None I saw on ebay, or oversized X ones. However a google search came up with this:

http://bore-tech.com/catalog/pistonringset15mm-p-265.html?osCsid=f3b3c78607ab01dd2c0d200792b59ba3\

For the Honda CB and CL 350's, not sure what a 3 piece oil ring means? But if it's a honda piston and the same size, theoretically it would work, right? Or maybe the stroke has some effect?

[TexFest]

Does servicehonda have them? not sure if all the years of the xr200 would be the same or not.

[TheRealFatShady]

All years look to be the same from 81-2002 except 1984/85 models.
13011-446-811

[portland250r]

check out service honda or powersportspro they should have them