sumdumguy
06-21-2010, 08:18 AM
so as a couple of you may have read I am planning on putting a 1986 200trx enigine in a 86 200x frame. This giving me reverse, e start and an auto clutch cruiser to have fun on..
first thing I noticed is the rear upper engine mount was in the way soI cut it off...
after getting the engine in the cradle I noticed that it was about a half inch to far to the left for the sprocket and chain to line up... moved to the front and i will be fabbing some sort of front mounts.. soi hooked up the wiring and cranked it up, trying different styles of mufflers I have, i will be sticking with the DG for this build. I will update as I can, thanks
first thing I noticed is the rear upper engine mount was in the way soI cut it off...
after getting the engine in the cradle I noticed that it was about a half inch to far to the left for the sprocket and chain to line up... moved to the front and i will be fabbing some sort of front mounts.. soi hooked up the wiring and cranked it up, trying different styles of mufflers I have, i will be sticking with the DG for this build. I will update as I can, thanks