Slingblade
06-28-2010, 12:54 AM
87 Tecate-3, Engine is stock, 38mm roundslide Mikuni,
Jemco pipe,
K&N with outer wear, stock airbox with holes in lid.
Maxima 927 at 32 to 1.
Boyesen Pro Series Carbon Fiber Reeds
1100 Feet above sea level, North Al., Hot and muggy at present.
Carb currently has a 270 main.
I know this is not the carb of choice,(maybe a pwk or lectron later) I've been fighting a completely worn out 38 pj and thought once I get my engine back together I'd try this mikuni. Any ideas for a baseline jetting set-up, on a new top-end, stock bore with a Wiseco.
Jemco pipe,
K&N with outer wear, stock airbox with holes in lid.
Maxima 927 at 32 to 1.
Boyesen Pro Series Carbon Fiber Reeds
1100 Feet above sea level, North Al., Hot and muggy at present.
Carb currently has a 270 main.
I know this is not the carb of choice,(maybe a pwk or lectron later) I've been fighting a completely worn out 38 pj and thought once I get my engine back together I'd try this mikuni. Any ideas for a baseline jetting set-up, on a new top-end, stock bore with a Wiseco.