Clutch Wrench Needed for 200X

[XDAD2]

I am in need of the clutch wrench for a Honda 200X. I ordered one through the local Honda dealer but today they told me that it is back ordered and they do not know when "OR IF" it will be here. I am thinking of making one from an old socket by grinding it so that if fits the grooves. If anyone has a wrench they would sell or take a deposit on and loan to me it would be greatly appreciated. Or if you have any ideas where I can get one or if you have made one please pass on the information. My nephew is kind of depending on me for fixing this for him and I would sure like to help him out.

[Howdy]

http://denniskirk.com/powervendor/details/detail.asp?serverid=OffRoad&PartNo=281970

There you go. It shows it is instock also.
Howdy

[Jason T]

I just did the very same job on our 83’ 200x, luckily my dad had already made this tool a few years ago. It looks like he has bent a bit of mild steel around a small socket, I guess he did this because we didn’t have a spare socket the right size and its easier to cut. To start with I thought it would be a bit weak, but they only have to be done up to 29-36 lb ft so there was no problem.
Hope this helps
Jason :)

[jeswinehart]

i made mine also. has held up great. a 7/8ths. socket is what i choose to wittle mine out of. seems to me it only took about a hour to fashion up.

john

[XDAD2]

Thanks for the help and the 7/8 socket worked perfectly. ON THE ROAD AGAIN.