custom built trailers for our ATC'S - let's see some pic.'s!

[johns'85 250sx]

this is for all the guys who have had to build a custom trailer for their ATC!
and no I don't mean those of us who just went out and bought a kit ! I mean the guys who went out got their hands dirty, took all the measurements, then welded it together!, and possibly painted it and added some good sides.here's mine it's built out of 3" C-channel, and 1/4" flat-bar where the tires are mounted, an old car roof-rack as a bed, and a piece of plywood in the rack as a deck, and a harbor freight 2" ball hitch, and it's painted flat-black, with some of my own custom work with a white paint-pen. but enough about mine let's see some of you guy's!
here's a pic. of mine
http://i53.tinypic.com/33e3bkw.jpg

[bigbadktm]

I have a 3 rail moto trailer that somebody homebuilt, that will soon be turned into a trike trailer. sorry no pics of it though

[johns'85 250sx]

that's cool! hope it works out well!

[hublake]

Here are a couple I have built for hauling firewood.

[86trizinger]

That is a serious log hauler. I have all the steel and tires for the trailer I was going to build, just haven't been able to find 4"x4" hubs cheap enough to fit in my budget yet.

[johns'85 250sx]

man oh man i have been thinking about building a trailer like those log trailers for years! (puts tongue back in mouth) do you use blue prints? and if so can you P.M. me them? Thanks!

[UndefinedT]

good ol' soledad...always a favorite rest stop on the way to Oceano :D

[harryredtrike]

i still want to make a rack for a two inch reciever to carry one trike.no wheels just a rack you can drive on and go.project is comming soon.i know it's not really what your asking but the topic is close enough

[tri again]

oh, you mean like one of those rack/baskets that fit into a regular hitch receiver
and holds motorcycles or whatever all by itself?

I saw one that had half moons on each side for the front and rear wheels of a 2 wheel bike hanging off the back of a motorhome.

Surely could be made or modified.

I put a 90 on the ROOF of the truck when the bed was full with a 185 and 2 other 90's.

(overhang lumber racks made it simple, and it looked reeeeally stupid but we have waaay more fun than the multi quad folks at the dunes with all their fancy toy hauler rigs) and way safer than having something with wheels like a trailer following us over the mountain passes.

[hublake]

man oh man i have been thinking about building a trailer like those log trailers for years! (puts tongue back in mouth) do you use blue prints? and if so can you P.M. me them? Thanks!

Had no blue prints. We just planned as we went along. We made it the same width as an 85 BR The front end is from a golf cart and the rest was made from scrap material my nephew and I had laying around. I did buy spindles and bearings for the rear wheels. The tires and wheels I had laying around Tires are 25-12-9. My nephew is a welder and did the welding.