Ninja 600 ATC 250r!!!

[Hatchguy06]

Just wanted to share my current and almost finished project.. A 1989 ninja 600r with a 250r swingarm...My original idea was to mount the Ninja motor on to the three wheeler frame since i had an extra 250 frame. But in the middle of the project i got lazy and wanted instant progress.. that is then when i just grafted the 250r swingarm on to the bike.. the results...well as scary three wheeled monster..pics and video coming soon.. here is a link to video..sorry about the quaility...

http://s1036.photobucket.com/albums/a444/hatchguy06/?action=view&current=IMG_0254.mp4

[Hatchguy06]

Wink Ninja 600 ATC 250r!!!

Just wanted to share my current and almost finished project.. A 1989 ninja 600r with a 250r swingarm...My original idea was to mount the Ninja motor on to the three wheeler frame since i had an extra 250 frame. But in the middle of the project i got lazy and wanted instant progress.. that is then when i just grafted the 250r swingarm on to the bike.. the results...well as scary three wheeled monster.. this weekend the other swingarm will be stretched 12 inches and we will going to local drag strip to test out..pics and video coming soon.. here is a link to video..sorry about the quaility...

http://s1036.photobucket.com/albums/a444/hatchguy06/?action=view&current=IMG_0254.mp4

Any ideas or help would be greatly appreciated...

[fabiodriven]

One thread is good enough buddy.

[Hatchguy06]

my bad got a lil carried away. thought it fit better in the second thread and just forgot to pull this one

[Mosh]

Cool you built that..
Actually we have policy here that all pics and video shoud contain a helmet on the rider..
Since you are new and it is only a 30 second vid in a driveway, we can let it slide.
But please next time refrain from posting media without a helmet...

And on that monster, a helmet is a good idea anyway.

[thestud25]

Yeah post some better pics. Looks cool. Are you going to mod the front end to take an ATV tire and suspension? That would make it even cooler.

Welcome to the boards.

Have any other trikes????

[dirtjunkie85]

sweet build! It would be sweet to slap some offroad forks and wheels on that bad boy and see how she flys on sand drags.

[SYKO]

check out my ninja-Z in my sig, its an older style motor but it runs great its on the backburner for now though like everyone else says put a trike front end on there!

[Hatchguy06]

Yea I have been looking into swapping the atc front end onto it... I Actually took it to the sandbar this past weekend... Had a few small problems, nothing too major.. new stretched swing arm is almost ready to go on it.. the fairings on back on it too.. I will post more pics and vids as new things come in the mail.. That video was literally like ten minutes after i bolted the everything together...As far as the helmet goes.. I usually wear a helmet but in this case i didnt for a couple reasons... never went fast by any means, and was at work... I was fully insured :):):)