Question About Bars / Throttle Cable

[DickyDanger]

My 110's stock bars are bent on the left side. havent found a decent set of stock bars and was looking at the moose atv hi rise bars. my question is if i get these bars is there a company that makes a longer throttle cable? it seems the stock one will run too short, or have any of you come across a set of bars similar to stock with maybe a little more height, Thanks.....

[DickyDanger]

really? no one can tell me if an extended throttle cable is available?

[Dirtcrasher]

I put tall bars ion my 70 and there was no issue.

I think you can get away with it in the front , it's the rear that once you add inches you have to lengthen it......

[tri again]

I had some dead rusted cables when I started collecting 90's and the local yamaha dealer
wanted the cable, both ends and how much longer I wanted it.

Pretty sure it was cheaper than a new one or I wouldn't have fallen for it.

(poverty consciousness)

[harryredtrike]

measure and get what you want.weather you get a custom set or a set in production,makes no difference.

[DickyDanger]

i just didnt want to get any ol throttle cable and have an issue with the carb not sealing etc etc. the throttle cable on the stock bars looks pretty tight might be run through the frame wrong? either way my bars are bent and i need new ones, and i was going to use a bmx brake cable if i couldent find an extended one so i could make use of the rear handbrake for doing parkig lot stunts. i got a nice red anodized asv lever for it....

[lardog]

Try "Terrycable" they should be able to help you. You can find them on google..

[DickyDanger]

thanks!!!!!