can i get some help on this stuff

[110ccatc]

you guys think i could fit a 200s front forks on my atc 110? so i have the skinnier tire?? and can i fit quad tires on my atc 110?

[ebecme01]

I had a 110 with a 200s front end on it, but I bought it that way so I dont know how much work was done

[Jeepermc]

I believe the front ends I put on my 90's were 200S fronts.... I used the factory size fat tire though... It's a pretty simple deal on the 90 and I think the 110 is virtually the same. I had to grind off the steering stops off the 90 frame and then weld some new ones on it for the new front end...

As for "quad tires" on your 110....Are you looking to bolt on wheels and tires or just tires? I bought some 300EX rear hubs and they fit the 90 axle just fine. They widen the rear slightly and allows you to bolt on any 4 on 110 wheels from quads on the rear of the trike. Still have to run the standard wheel and tire on the front though...

[mrmello]

This Might help with the tire situation. Has the bolt pattern and wheel & tire size of most ATV's listed

http://www.mud-throwers.com/atv_wheel_chart

[Jeepermc]

This Might help with the tire situation. Has the bolt pattern and wheel & tire size of most ATV's listed

http://www.mud-throwers.com/atv_wheel_chart

I hope it does....but, I have 3 different hubs with the 2 200S front ends I bought and each one has a different bolt pattern...