What is the stock HUB size for a 1st gen 200x

[ATCrider42]

I beleive I bought a stock set of wheels and tires for my 200x and they don't fit the hubs that I have on my 200x currently. The hubs I have now appear to be 6 1/4" from lug to lug but the wheels I just bought appear to be 4 1/4" from lug to lug. What is the stock size hub for the 1st gen 200x?
114679Left: new wheels Right: current set-up114681

[shortline10]

110mm is the stock size for a 200x .

[ATCrider42]

What would 160mm be for then?

[shortline10]

Not sure on the 160mm . Honda has a 155mm but no 160mm that I know of .


What would 160mm be for then?

[Flossyb20]

Holy Tire Batman!! Those things looks huge. The picture of the hub you have there is not stock 200x, not sure what its off of. You're in luck thought, first gen 200x hubs are pretty common = cheap, you should have no trouble finding a good set. 83-84 250r hubs will also work.

[86trizinger]

Some Yamaha's have the same axle spline as the 200x and 300ex.. I had blaster rear hubs that fit right on the stock 1985 200x axle.

[ATCrider42]

Holy Tire Batman!! Those things looks huge.

They are huge. They get great traction but are heavy and wide. So i bought a pair of stock wheels and then found that my hubs are not the stock size. So I wanna know what I have so i can sell the set of hubs that are on there now and I'm looking at some original sized hubs now. They may be 155mm on there now. I just did a quick measurement and they're about 6 1/4"

[Flossyb20]

You may have to search a bit, but somewhere on here I remember someone posting a chart with just the info you need, it had lug pattern, spline size, offset, for alot of ATVs. Also, if you ever plan on making a swap to the 9" rims, you may want to consider getting a set of 86-87 200x, or any 400ex rear hubs instead. They have the same lug pattern and spline sixe as yours, but also longer studs you'd need to put on the 9's. Only thing is you'd need to get are conical lug nuts for those hubs, as they are lug-centric, not hub-centric like the 1st gen hubs.

[ATCrider42]

I'll probably stick with the 8" rims and get the stock hubs. I'm trying to keep this 200x "original" but we'll see how these wheels do. All i know now is 10" wide wheels is too wide for the 200x.

[blue27]

look like Kawasaki Mojave wheels

[ATCrider42]

look like Kawasaki Mojave wheels

Thanks, ill look it into it and see if they're from a kawasaki. I really don't want kawasaki parts on my Honda trike. Prolly the reason why I had to rebuild the engine this winter. It's kawasaki's fault. :crazy:

[ATCrider42]

I just noticed in the picture of my trike from the backend with the wheels off the ground, you can see the holes in the floor by the left wheel where I got pissed from trying to remove the swingarm bolt, and bashed the concrete floor with the hammer. Dam, swingarm bolts.