clutch help or ideas on 200e big red

[sherryhunter]

i have a 200es big red and i changed the oil and cleaned the oil filter rotor when i put it all back together and put oil in and was going to pull out of garage and put in gear it clunked right out what is going on i did not do anything that i know i tried adjusting the clutch but that does not help
this thing ran and shifted like a top tell i cleaned the filter what did i do wrong all help is good

[sherryhunter]

come on guys need help is there a possibility i put the oil rotor together wrong would that do it help me out

[rugman316]

Did you make sure the spring assembly went back into the right place when you put the cover back on? I usually stick my left hand back in there and try to guide it in while I'm putting the cover back in place. I think you are going to have to pull the right cover off again and have a look. Unless your clutch is totally out of adjustment but they are pretty basic to adjust.

[sherryhunter]

ya sure it is going on rt adjust the clutch how it says in the manual turning the adjuster counterclockwise tell feeling tension and 1/4 turn clock wise after that and then retighten lock nut and when i put it in gear it wants to take off
did i put one of the washer like peice on the wrong way on the filter rotor took for ride and it has no go in higher gears tell u shift back down like the clutch is draging or still in gage but when u put into first it wants to go like there is not enough clutch tension what else to look at like i said this thing ran and shifted fine tell i clean this oil filter rotor i am starting to think it was a bad idea i am so pissed! help me out guys new to working on these wheelers thanks much