Help with goki starter 350x

[honda200xatc]

I bought a goki starter used which didnt come with any instructions on how to put on trike. I have the assembly drawing of how to run the wires but I have a question about the yellow wires. On my drawing it says 1 on the yellow wires goes to "AC Regulator" and the other goes to "stock wire loom" What exactly do these wires do? I have assembled everything on my floor and when I push the start button all I hear is the starter solenoid clicking and the starter doesnt turn over. Do these yellow wires have something to do with this not turning the starter motor over? If anyone has some answers or pictures of their install that would be greatly appreciated. I dont even know how to install the ring gear but I am thinking you must take flywheel off and press the ring gear onto flywheel. Please let me know. Thanks

[honda200xatc]

ok nevermind I figured it out. I just didnt have the starter grounded so thats why the starter solenoid was just clicking. I still do need to know how you install the ring gear. I believe the triangle pieces that come with the kit are used to press the gear on the flywheel but not 100% sure. Please let me know exactly how I am supposed to install the gear. Thanks

[tri again]

I was actually at the goki site recently so they're still making stuff.

Maybe they have something there.

Estarters are definitely leg savers.

[honda200xatc]

Anyone have any pics of them installing the 350x electric starter? All i need to know is how to install the ring gear on the flywheel. I am missing the instructions and dont want to screw something up by not installing it right. Please help. Thanks

[Hurricane635]

Just warm up the gear and push it all the way on the flywheel let it cool.

[honda200xatc]

I know it has to be pressed on but it that what the triangle pieces are for? It looks like they are used for pressing the gear on but I want to know for sure before I start wrenching on it and destory a piece

[beets442]

Looked up goki in the world class help and there is 96 pages. might want to browse thru.

[Hurricane635]

I'm not sure I've done 3 but all were used, never seen the pieces you're describing, my instructions don't say anything about them.

[honda200xatc]

It is the triangle pieces in the bottom left of the pic






117194

[Hurricane635]

Wow,I've got no idea what those are for, I've never used them and my kits went together well.

[honda200xatc]

I am thinking you sandwich the flywheel and ring gear together and put the bolts through the holes and crank down to evenly press the gear on the flywheel but Im not for sure.