Will any other swing arms bolt onto an 86 200x with minor or no mods

[booblinker]

Well I can't find a carrier for my 86 200x, so i am thinking about buying a whole swing off something else. Need to find something else that will bolt in with minor mods, I can do minor welds like adding a shock mount in a different spot.

[bcredneck]

ive never messered but the 200x and 350x swingarms look the same exeped the carier im not saying it will fit but you might be able to make it fit

[Aka_am]

Its close, about 3mm or 1/8 inch on each side... I think :Bounce The 200x is 198mm or 7 3/4 inches.

[mi500]

Its close, about 3mm or 1/8 inch on each side... I think :Bounce The 200x is 198mm or 7 3/4 inches.

so with a little trimming you could make it fit?

[atctim]

300EX works with a bit of trimming!

[bcredneck]

so with a little trimming you could make it fit?
ya but you will have to mod the shock mounts i highly dought they are the same but the OP said he could deal with that