200x chain tensioner/adjusters?

[hang&rattle]

Are the 350x, 1st and 2nd generation 200x, and the 3rd generation R's all the same? Or what other kinds of honda 3-wheelers sport identical adjusters/tensioners to the 84' 200x? One of Onnie's snapped off in the cold. I remember a member sending me a link to new ones for around $5 a piece. Does a member reproduce these or sell these. I'm tired of searching and have come up with nothing other than old rotten ones on e-bay.

[Ironbnder]

85-86 R and X adjust with the rear carrier. Totally different than 84 200X.

[tri-Z ripper]

no sir 85-200X also has chain adjusters.

[Ironbnder]

I was refering to the 350X. My bad.

83-85 200x had swinger adjusters like H&R needs.

[Hurricane635]

81-82 250r.

[Rollingmenace]

81-82 250r.

Negative the 81 82r have a similar system but uses just a 10mm bolt and locknut on each side to adjust..... same concept different design....

Robby Send a pm to flyingW (jim) @ .ORG he may be able to help you out ...of frank destra FNMRD over there as well they have helped me out alot on parts...

[hang&rattle]

Thank you Rollingmenace, that's just the lead I needed, thanks so much- Robby