what did you learn today?

[jellybelly559]

i learned if you put wd-40 or as i used a silicone lubricant your plastics look a whole lot shinier and mud slides right off :Bounce

[250Eddie]

<== says, If the bike aint dirty, your not having fun =)

[jellybelly559]

hahaha i like how it made the deeper scratches that turn whitish turn that nice red again when i put that silicone on it

[250Eddie]

once it dry's up its gonna look even worse, ive tryed that trailprotrailpro and it made it worse sadly.

[jellybelly559]

what about polish? hahaha any one else learn anything new?!?!?!?!

[hillbilly 200x]

I learned how to trailprotrailprotrailprotrailpro :D lol

[250Eddie]

polish will dry up and start to flake the plastics and turn them white with time, Best thing to do to keep the plastics looking nice is after riding wash the bike or bikes and keep them out of the sun and rain, but the bad thing for me is both mine and my dads bikes have the plastics and seats look very bad becuz of the old owners keeping the bikes in the sun and rain the whole year.

[1984 honda 200s]

i learnt that my 200s isnt made for water over 3 feet deep,, i crossed this field and saw some ice patches, so i went and played around on them then all of a sudden i was up to my knees in freezing water im 6'3'' haha , poor bike got swamped... then randomly as i was trying to get the bike out of the water, some municipality workers stoped witht he truck and pulled me out ! great day...

[jellybelly559]

hahaha^ that mustve sucked......i got a question about people who know about 85 R's and didnt want to make another thread......is their any fluid or anything in the left circular i believe the clutch or stator cover? right beneath the cylinder......i sanded and polished my right round part of my crank case and want to do the other side

[jellybelly559]

i uploaded a pic of my crankcase round part i started sanding and polishing on my facebook
http://www.facebook.com/permalink.php?story_fbid=117602854984038&id=100002029734993#!/profile.php?id=100001751368270

[TatTooL23]

I "learnt" (as "1984 honda 200s says") that a dirtbike front end will fit on a 250sx, lol.

[jellybelly559]

lmfao i just saw that post

[250Eddie]

LOL thats funny

[jellybelly559]

think itll fit on a R? rofl

[falloutboy]

I learned that mothers aluminum polish makes a plastic tank really shiny after wetsanding with 2000 grit.

[oscarmayer]

that the world is full of stupid people. theya re so dumb, they don't even know they are stupid!

[Sick200x]

I learned not to use an old worn out chain just for a test ride! Just got my 350x together yesterday, installed a 400ex carb and fabbed up a z400 muffler/silencer for it. was still waiting on a new chain so made one to fit with old chain and a couple masterlinks. I was right in the middle of a third gear wheelie when the chain snapped! Put a hole in the stator cover! No oil was spraying out though? I'll still need to take it apart and see how bad it is, I was too pissed last night to mess with it...

[gewash76]

I learned where the smaller O ring goes on a Big Red 250ES on the oil filter assembly....and why. lol

[250Eddie]

I learnt that WOMEN CANT DRIVE!!!!!!!!!!!!!!!!

[squirrel1182]

i learned that bar and chain oil (for chainsaws) wont sling off your trikes chain as easy as regular oil.

[jellybelly559]

today i learned that sanding and polishing your motor/crankcase isnt that hard just takes time......and that jokers racing is a pretty good dealer my part came in and didnt have any kind of problems with shipping,quality,price, anything

[Ironbnder]

I just learned two things:
(1) not all threads on 3WW need to be read
(2) that I agree with Glamy.

[250Eddie]

Rofl @ ^^^^^^