Why nerf bars are a good idea

[rambo22]

Well in my first post i was saying out i pulled my dads 350x out of the shed. I never said why it was put away in the first place. It happened 8 years ago when we were morale mushroom hunting at the farm. He was riding his 350 around when a fence wire flung up and got wrapped around his foot as well as getting wrapped around the axle. Well you can guess what happened next, the wire drug him under the 350 and snapped is foot 180 degrees around. While this was all happening he managed to get the thing in neutral and get the wire off his foot. I went and got grandpa and we loaded him in the truck i can remember riding behind the truck while my dad was laying in the bed of the truck and his foot was flopping around. He leaned forward grabbed his foot and rotated it 180 degrees back to where it should be. (ouch!) later the abulance came and took him to the hospital. The doctor said if he wouldnt have twisted his foot back there would have been even more serious problems. And thank goodness for leather boots, he said if it wasnt for his leather boots it would have cut his foot clear to the bone. He still has the scars to this day. So of course were going to put nerf bars on this machine. Any ideas on some nerf bar designs?

[bcredneck]

i cant rebmeber who did it but theres a thread on here where someone built a realy good set for the 350x

[hillbilly 200x]

3/4'' water pipe and a some 90's, you can get everything at a hardware store

[fabiodriven]

3/4'' water pipe and a some 90's, you can get everything at a hardware store

I bet those would look trick.

[NESC104]

that is so awesome

[Dirtcrasher]

^ He has the nice set I put on his 350X. I hope to put them on mine also......

Lets see that pic Josh :D

[hillbilly 200x]

i just found the thread on the water pipe nerf bars http://www.3wheelerworld.com/showthread.php?127361-I-made-nerf-bars-for-my-250r-*Pic-Heavy*&highlight=

[fabiodriven]

i just found the thread on the water pipe nerf bars http://www.3wheelerworld.com/showthread.php?127361-I-made-nerf-bars-for-my-250r-*Pic-Heavy*&highlight=

I knew those would look trick. I would drill holes in the pipes and rig up a holding tank. Then you can dust crops with it too.

[Dirtcrasher]

^ lmfao!!!!!!!!!!

[hillbilly 200x]

ahahahaha rofl

[ironchop]

I knew those would look trick. I would drill holes in the pipes and rig up a holding tank. Then you can dust crops with it too.

holy cow....there are tears streaming down my face from the sheer hilarity

[1984 honda 200s]

i got a set of homemade ones for a 200s, all square tubing, heavy buggers but thay look whicked.