85 Yamaha 200e rear end bearing replacement instructions or diagrams?

[Unfiltered]

My local repair Guy Dosnt think I should attempt to change my own rear end bearings. I understand they can be a pain sometimes. So I said OK you can do it but im going to take the rear end out and bring it to you. The bike is apart mostly right now for brakes etc . Im looking for a diagram of how it comes apart. Never had a shaft drive wheeler before. Not sure what holds the shaft in place etc. If i splitt the shaft housing does it slide out like a regular drive shaft? I work on power tools for a living Im inclined enough to fix stuff. Is it worth it to try or just let the shop do it?

[MonroeMike]

Chapter 10.
http://72.52.143.80/~trikes/ytm200&225-fm200_clymer_manual.pdf

[Unfiltered]

thanks Mike but i cant seem to open that for some reason.

[MonroeMike]

Right click and save it to your computer, then open it.

You need Adobe reader, if you don't have it.

[Unfiltered]

OK gotcha Thanks Again. Learning lots working on this bike. I have been keeping my kids Knock off wheelers alive for 3 years this should be easy.

[Unfiltered]

OK its apart but got the wrong bearing kit. One shaft side is a 6008 the other side I have no idea what it is. One bearing stayed in the housing one came out on the axle. Two hits with a 10 pound sledge it slid right out. Of course I Protected the threads. Hopefully I can get the right parts Monday.

[Unfiltered]

Anyone know what size the brake side bearing is? Its larger then the 6008 for the shaft side. I got my bearing kit from All Balls . Hopefully just missed buy a couple numbers in the book.