anybody ever own a 1989 cr250r? i would appreciate any info..

[250r_doverdemon]

well i found a nice cr250r that im thinking bout trading for my 99 polaris indy 700. the guy lives bout an hour from me and i have no way of getting there so i figured if he brought it down id call it an even trade since my sled needs a track ($320) but his bike needs a seal behind the front sproket, anybody know what hes talking boutÉ do i have to split the cases?

[code200k]

I had one and loved it..Was a great beater bike that ripped..Still have a book for it that i gotta sell..
If you were closer i would trade ya my tecate project and cash for it lol

[250r_doverdemon]

lol yeah i think itl be sweet but id like to know how long one tank lasts? couple hours?

[Thorpe]

Loved my 89 cr250... Wheelie machine.... How long does a tank last? How hard are you gonna ride it?

[dksix]

I just bought a 90 CR250, the 89-91 are basically the same bikes. I traded a Yamaha Moto 4 for it that I had $100 in. The engine was trashed and in a box. Someone had misunderstood how a 2 stroke worked. They filled the tank with gas and the crankcase with premix-LEVEL FULL! Need less to say, it cause catastrophic engine failure, still have the cases to prove it, lol. The parts are hard to find for them, 92 and later is completely different. I just bought a set of case earlier this week on ebay, after passing them up at $140 each for a couple months. The parts to completely rebuild the top and bottom end was $366, crank rebuild was $45, boring was $35, set of cases was $106. That's everything new except tranny gears, crank, cylinder and head. I may be putting it together next week, might be able to assist you after that if your cases do have to come apart.

Code200K, what book do you have? I could use one that shows how everything goes back together in the tranny.

[250r_doverdemon]

well that deal went sour but i would still trade for a cr250r

[code200k]

I just bought a 90 CR250,.....

Code200K, what book do you have? I could use one that shows how everything goes back together in the tranny.
this one 25 bucks shipped..pm me and we can talk

[Thorpe]

^^Heck of a deal for the original service manual!

[Dirtcrasher]

^yes that is!

My bud Larry the 89 and I had the 94.

He did nothing to that 89, and I mean NOTHING. It just ran and ran for about 4 years on any junk oil known to man until the crank finally let go. He rode it to work every day, it was bulletproof!

Jeremy Mcgrath rode the 93 CR250 for as many years as he could, he loved the feeling of the frame.

Here is my old 94:

http://i257.photobucket.com/albums/hh220/Dirtcrasher/IMG_0004.jpg

[code200k]

Nice Bike Steve... here is a couple pics of my old bike that i traded for an 84 R..Bike was all stock that i know of and would take anything..Only problem was i ran threw tanks of gas like nothing..But never had to turn a wrench on it besides the tune i gave it when i bought it...

[atc007]

To answer your original ? . The fr sprocket seal,countershaft , simply goes behind the fr sprocket. Simple as that. 15 minute job. Hopefully : )

[250r_doverdemon]

To answer your original ? . The fr sprocket seal,countershaft , simply goes behind the fr sprocket. Simple as that. 15 minute job. Hopefully : )


thanks but that deal went sour but im still hoping to get my hands on a cr250r or if im super lucky a cr500r :D