Decal repro help !

[honda200x1987]

I need a member to help get a warning decal reproduced. No one has ever reproduced it that I am aware of and the only decal not produced for this model. I have tried to contact Harlan Lysne for 2 months now but I have had no response since I ordered from him. I need a 1986-87 HONDA ATC200X rear fender warning tire pressure decal reproduced. The rear fender warning decal that is on my bike now is not in the best of shape so I have a approximate measurements due to the edges are not all there. The decal should be exact measurement as the 1986 TRX250R decal. Here are the measurements of the 200X decal as follows: WIDTH 1" & 3/4" X LENGTH 3"X 3/4" Like I said before the TRX250R decal looks identical to the ATC200X only a small part of the technical data is different. FOR REFERENCE On the bottom right corner of the TRX250R decal there is a part number:HB9-670 . On the ATC200X decal the part number is HB5-670 . I have attached one picture of the 200X and one for the TRX250R for reference only. .......... This is a must when doing a full resto .Hope you guys can help! 126877126878

[atc007]

SpeednSport,,Bloomsburg PA. They'll hook you up!

[rdlsz24]

Harlan is back from vacation now... there was just a post yesterday or today that he is emailing back again

Rob

[pigdog]

How good are the SpeedandSport decals? I was looking into their atc90 ones on Ebay.
Thanks

[atc007]

I have never used them,or ANY other repros... But i have toured there complex,,and it is VERY impressive!! The decals,,I SAW,,were Identical to OEM. They were BW 350's. They have a huge store on Ebay,,don't know the name right off hand..

[Yamaha3wheeler]

Speed and Sport is not reproducing until mid August. They are in the process of relocating their graphics dept.

[honda200x1987]

Just got an email from Harlan, he has not reproduced the waring decal for the 86-87 ATC200X yet but he is working on it! I'd say alot of you guys need this one,it's the only decal missing on my bike since I bolted on the NOS rear fender.

[atc007]

Awesome !!!!

[bkm]

I also received a message from Harlan. He sent me pics of the complete kit for my '86 R, and man do they look nice. I can't wait to get them.

[honda200x1987]

Does anyone have a TRX250R rear fender warning decal they would sell??? I have a guy who needs this for reference to produce the 86-87 200X decal. it is exactly the same except for the techical data which will be corrected, just need the 250R for the scan. I'm paypal ready!

[honda200x1987]

If anyone has a used 1986-87 200X rear fender WARNING decal they would sell, that would be PERFECT!!

[honda200x1987]

Unfortunately Harlan is not making the 200X warining decal but he is mailing me the TRX250R decal. I have another person doing it for me, when its done I will post a picture if anyone else needs one. I am sure there are some of you who do..

[dirtwheels]

Thats good. I could use a couple of those. The two are so close except for those front/rear numbers and the 9 in the part code. Should not be too tough to recreate in Illustrator after scanning it in to get clean vector .eps artwork for Harlan. He output some Durablue decals I reproduced in Illustrator and they came out mint. I told him it was another file he could add to his library and he sent me a few extra decals for good measure.