200x--putting axle back on--stuck

[yater]

I'm trying to put my rear axle back on and I've got the new bearings and seals in. My problem is I cant get the sprocket hub or the brake hub to slide into the seal. Do I just bang on it or will I break something? Aren't they supposed to slide in there? I can't get the collar on far enough until I figure something out.--thanks (I'm working on an '86 200x)

[cew73]

i also bought bearings and seals (from ebay)1
i never took mine out yet, post something when you get it on :)
i wish ihad more info for ya! Good Luck :-P
cew73

[cew73]

you sure the sprocket is sliding on the right way :D

[ATCnut]

Try putting the brake hub in the seal without the axle. they can be kinda tight. If they do not fit you may not have the right seal.

[3wheelmotion]

read the numbers on the seal and put them up here.

[yater]

I got everything worked out--thanks everyone!