PDA

View Full Version : ytm225dx


jr315rn
07-16-2011, 01:40 PM
im looking for mods for my 1984 225dx any ideas, or place to buy parts?
jake :cool:
leevarnado
07-16-2011, 07:50 PM
search through my post
jr315rn
07-17-2011, 01:54 PM
i couldnt find anything sorry man...
leevarnado
07-17-2011, 03:51 PM
http://www.3wheelerworld.com/showthread.php?128822-new-project-ytm225&p=1001005&highlight=#post1001005
jr315rn
07-17-2011, 04:07 PM
thank you sir
jr315rn
07-17-2011, 04:10 PM
ya thats really sweett i need to get new plastics and racks
El Camexican
07-17-2011, 10:02 PM
Pull your head, clean up the exhaust port, open the intake to 27mm. Open up the rubber boot the same (be care you don't take to much off or it will crack) Shave .020 off the head and put a pipe on it. Thats what I did to my YTM 200, but I put the 29mm carb you already have on it as well as a 10.5 piston. I seem to have lost a little top end. I was clocked at 56mph years ago bone stock, but that was with nice soft tires that grew with speed and I was only 140lbs. Now I'm 200# and my tires don't grow much. Regardless, the midrange is stupid on this thing. Watch the front end during the video http://www.youtube.com/watch?v=0W2t64OD0Ew Oh yea, there is some guy in CA that will grind your stock cam, but he wants like $400 and I have no idea what it will run like. Good luck!
bigdarren
07-18-2011, 05:04 PM
tri z front end will give longer travel and disc break ...
jr315rn
07-19-2011, 10:14 AM
got any pics?
bigdarren
07-19-2011, 05:47 PM
got any pics?

will see if i can find one, its my mates trike so may take a few days
bigdarren
07-19-2011, 06:00 PM
my mates 225 with tri z front end and blaster hubs and 10inch rims
jr315rn
07-19-2011, 07:32 PM
thts a really nice wheeler. does it take any frame mods?\
Six Stroke
07-20-2011, 02:59 AM
Were the Blaster hubs a bolt-on swap?
teamboaty
07-20-2011, 06:34 PM
Also if you experience any clutch slippage You can upgrade to a timberwolf atv clutch. Or equivalent. BOLT ON PERFORMANCE. I just did it to mine. Way easier to find used too and cheaper
teamboaty
07-20-2011, 06:38 PM
Bad ass man. I absolutely love my 225dx. Almost more than my faster toys.

Pull your head, clean up the exhaust port, open the intake to 27mm. Open up the rubber boot the same (be care you don't take to much off or it will crack) Shave .020 off the head and put a pipe on it. Thats what I did to my YTM 200, but I put the 29mm carb you already have on it as well as a 10.5 piston. I seem to have lost a little top end. I was clocked at 56mph years ago bone stock, but that was with nice soft tires that grew with speed and I was only 140lbs. Now I'm 200# and my tires don't grow much. Regardless, the midrange is stupid on this thing. Watch the front end during the video http://www.youtube.com/watch?v=0W2t64OD0Ew Oh yea, there is some guy in CA that will grind your stock cam, but he wants like $400 and I have no idea what it will run like. Good luck!
teamboaty
07-20-2011, 06:40 PM
Nice. And with the 10" rear rims it kinda evens out the extra rake in the front from the z front end. COOL


my mates 225 with tri z front end and blaster hubs and 10inch rims