pantera1975
07-21-2011, 10:51 PM
I got my cyl bored and they gave me a new head gasket. Do I have it on the correct way in the pic of the gasket sitting on the cyl? Its a 3 piece but 1/2 as thick of the old gasket I took off. It had 175 psi of compression before I sized it can I use 2 of the 3 pieces of the gasket? The silver head is milled and the grey one is stock theres alot of material shaved off. I want to run 91 octane with no problems. Do I need to use somthing like that copper gasket spray? Thanks