help

[zackwhite]

can some1 tell me if a 250 timberwolf flywheel will work on a 200s

[oscarmayer]

nope.
if you post itn he forsale forum ans ask for one, i'm sure osmeone will have one for sale and respond quickly as in a few hours.

[zackwhite]

ok i thought it looked the same coouldnt really tell

[oscarmayer]

nope the keyways are different and so are a few other things.

[zackwhite]

the key ways dont matter i plan on welding it in anyways

[just ben]

don't weld anything! although it may look the same the north- south of the magnets may be different not to mention the position of the keyway. if you welded it how do you plan to get the timing right or adjusting it when its not?

[zackwhite]

all i got to do it put the flywheel on the way it gos.and line up the t mark and then set it up by the timeing sproket

[just ben]

the timing marks will mean nothing. put up a wanted ad, I'm sure someone will get one to you cheap just to not see you ruin the crank

[bkm]

all i got to do it put the flywheel on the way it gos.and line up the t mark and then set it up by the timeing sproket
Well it sounds as if you have it all fiqured out. Why come in here and ask a bunch of no nothings if your yamaha flywheel will fit on your honda engine if its just as simple as puting a square peg in a round hole.

[zackwhite]

i dont ahve it i wanted to no if it wood work cus i can buy 1 if i want and it works trust me thats how i line up my timeing..but ill wait i dont wanna trailprotrailprotrailprotrailpro it up and ahve to get a motor

[just ben]

when crossing two different animals lining up the timing marks simply wont work.powdiddy has one I think for an 84.check out his thread for 84 200s parts. he is also parting an m

[Chazz of Blades]

You have two options, either listen to the advice here, or try it yourself and trailprotrailprotrailprotrailpro it all up, then come BACK here and want to know how to get the dang welded thing back off. THEY ARE NOT INTERCHANGABLE, DON'T SCREW YOUR MACHINE UP TRYING. Please, don't take mine, or any one else here's advice, seeing as nobody here has the slightest bit of mechanical inclination and all.

[oscarmayer]

hey Zack, Sorry we wasted our tie on ya man.