jordan_muirhead
09-20-2011, 11:01 PM
i have a 1996 ford explorer 4.0 V6 with around 280k miles, and in the very very near i gotta replace all the front end parts, it walks all over the road, negative camber on the left side, squeaks, and lots of vibration on bumps just started, plus the camber is causing my tire to wear, I'm already planning on getting the upper and lower ball joints, upper and lower control arm bushing, shocks, sway-bar frame bushings, sway-bar link kit, and tie rod ends, does anybody know of anything i should look for on this, or anything i left out that should be replaced while i do this? i don't wanna have to get somebody to help me twice, i know a lot of guys on here have a lot of experience with anything with wheels and some things without, so i was just seeing if anybody had any tips or advice...