225dx rear hub

[Husky250]

Was out with my son on his Raptor while riding the wife's DX..... Was hitting all my normal logs, bumps, jumps, etc when I sheered off my lugs (rt rear). As the wheel cam off it bent the hub beyond recognition, let alone repair..... SIGH! Read somewhere that I can put Blaster hubs and wheels on it.... Thank heavens for E-Bay! Gonna be trike-less for a few weeks though:mad:..... Unless anyone else has an idea?

[Yamaha3wheeler]

Is the axle bent at all?

[Lime 225 DX]

I have an extra hub i could sell! For a 225 dx

[YoungJay]

had a 225dx hurd that the wheels will fit also, Might want to try off something before u go spending money on it if it don't fit.

[muthey]

I have a spare 3 bolt hub as well if you need it, might want to put new studs in it, but I figure for 10$ shipped I think it's a fair price

[Husky250]

Thanks Muthey and Lime... However the hub isn't the only issue. It sheered off 2 lugs but the one stayed fast. The next immediate bump/log/turn pulled the remaining lug just about all the way through the hub. The resultingbend also destroyed the wheel. I would need a hub and wheel. Thanks for the reply guys! Been off for a few days. A transformer blew outside my house and completely torched the computer. Took us some shopping around before we could get a new one.... To that end it will be a smidge before I get enough funds to fix the DX. Hell I have the "X" sitting out there, in pieces, waiting on valves and springs yet too.... SIGH!

[brd812]

were are you in ne ohio? I have the hub and wheel to help you out. I run 4 bolts on my dx to match my raptor and shee. I can give you the 3 bolt hubs I dont need them, but first I have to find them. lol

[Lil Earl]

were are you in ne ohio? I have the hub and wheel to help you out. I run 4 bolts on my dx to match my raptor and shee. I can give you the 3 bolt hubs I dont need them, but first I have to find them. lol
so what hubs are you using that fit on the axile?

[brd812]

Banshee 4 x 115 hubs w/ 2in spacers , I currently run 20 x 11 x 9 pure sport bandits.

[yamaha driver]

i found out 200x hubs fit also.

[Cert88]

i ripped 2 insides out of the wheels, before I beefed it up.

Upgrade to banshee/blaster hubs, with douglas wheels...pretty cheap and will hold up to alot more beating than the factory wheels and hubs.

[Husky250]

Banshee 4 x 115 hubs w/ 2in spacers , I currently run 20 x 11 x 9 pure sport bandits.

Bet that is a sweet DX! Having a ball on the wife's DX but it needs a bit of massaging to get it capable of doing what I've been doing to it. Clutch is BAD (LOL), want to eventually do the banshee ugrade and I have a 200x front end I want to stick on it. Figure She's be a pretty spry little woods trike with that set up.

[Bryan Raffa]

all yamaha sport hubs fit ,, tri-z,blaster,raptor,warrior,banshee,yfz.. just depends on what you wanna run.

[Husky250]

Thanks Bryan! Local shop (friend of mine) and I had determined that but I don't have the $100 he wants for the 2 wheels, hubs and tires right now. The last month has seen me lose/spend $2400+..... Have to recover from that shock before I get the toys running straight again!

[tjtim316]

all years? or are there only certain years to use? do you have any specific info on this

[ps2fixer]

Since this old thread got bumped, I'll add in some Tri-Z hub details, based on post #13 they should fit the 225DX and quite a few other machines.

1985 Tri-Z hub measurements:
Bolt pattern: 4x100mm
Spine size: 25mm
Hub thickness (where it interfaces with the splines on the axle): 43mm
Offset: 8mm from axle bolt surface (inaccurate measurement with caliper + eyeballing)


The Tri-Z hubs fit on a 1984 TRX200 rear axle, and also a 1984 ATC200ES axle.