How to gain posting access to the rest of the site.

[TylerMarden]

need some access

[Tri85]

Just bought my first tri z in 23 years! Looking forward to getting back into it. Gonna need a lot of help/ideas to get this one up to snuff. I've got the two in but just realized I needed 10 posts so here goes........

[wwivhobbit]

I was searching google to see if I could find any race videos from races I ran back in the 80's and saw a thread with Mike Coe on this site. Needless to say it has been the coolest week I've had in quite some time, reading about the inner workings of Team Honda from way back when. It wasn't until the discussion went to Lake George and races I actually ran (and won) that I tried to post some replies, to no avail :( I would dearly love to join the discussion there, but I guess it'll have to wait a couple of months. The thread is already 5+ years old, so what's a couple more months, right? ;)

[lgordnier]

Isnt this just going to mean a lot more rubbish posts just to get the ten. Ive spent 2-3 hours a night on here but never needed to post, now I do.

agreed. hehe

[DreamerTM]

totally agree with that. i need to post a question for the first time! usually i just have to read through all the threads and get my answer that way... not this time =/


I fully agree with you, more bs posts and those who have been members for a while and don't like to clutter up the board now have to post just to be able to post elsewhere where they might actually be able to contribute.

[ncorry]

First post. Looking for the ID and OD of a 1984 ATC200ES fuel line.

[jwilz]

hey i know its a doosh move to demand to be accepted for the rest of access on here. So im not. Just curious if they keep up on the requirements and once you've met them cause i'm pretty sure i triple both requirements. Just really enjoy the site and am anxious for access to the rest.

[jwilz]

man i really shouldn't be this computer illiterate for only being 28. im pretty sure i've been given access already.

[8L4ckVVid0]

10 posts doesnt seem like alot until you're up early in the morning searching the net for a deal on a trike.

[ZACHNJOENJAKE]

Sorry, some more rubbish to become bonafide. Not sure why it is necessary. Have been a member for more than 8 months, not much on posting, but this site is a wealth of knowledge, thought I could add something, so have to jump though this hoop?

[DaveyJones]

Trying to find some help with getting my 225DR to gain spark again after it went for a swim. Any help would be great. I have week spark and am not sure what to look at next step.
Thank You.

[Fink]

whats up guys and gals, trying to post stuff so i can add pics to a thread i started awhile ago

[conner]

this is a very good idea to weed out all new weird peoples even though I am only a few days old myself I like it :)

[hoosierlogger]

this is a very good idea to weed out all new weird peoples even though I am only a few days old myself I like it :)it keeps us from getting new weird people, but it doesn't do anything for the weirdos we already have. Lol

[ManlyCarnival]

Now if I am a scammer looking to make money off some poor innocent buyer or seller do you really think 2 months is gonna deter this activity? Most scammers can be spotted by anybody over the age of 12 from a mile away. On other forums that I am a member of the scammer usually ends up being a veteran member that is going through a hard time ie. loss of job, divorce, foreclosure, bankruptcy etc. and chooses to scam other members and just disappear. This is the internet people. Although a few of the members here have probably met face to face before most probably have not. If it smells like a scam it probably is, just run the other way. Also always receive payment through paypal or by USPS Money Order. Is it really that hard to understand?
Personally I think this guy has made a several very good points

[Mudbug20]

Personally I think this guy has made a several very good points

I agree. And it dosent take 2 long miserable months to learn to use a sight. Its actually kind of frustrating cause i wanna be part of it be able to buy and sell parts, learn, ask questions and everything. But I have to wait?

[JediNinja63]

Sounds like a great place. You should probably go back there.

Seems like a real friendly place.... Hopefully this is not what you had in mind with "Veteran members will be available to help answer questions"

[Outlaw #24]

The only thing I want to buy here is the Raffle ticket for Trike Fest! I just like to see the price people are asking for their stuff in classifieds! And we'll see how much the veterans monitor these threads!

[Poco Loco]

I have so much to sell. 350x and 250 r and trx 250x parts ct90 parts. I cant use the classified area. Wa wa wa, Im just a newbie that has a wealth of knowledge to share and parts galore too. Im not worthy ...expearanced vet here...

[mr_3_0_5]

i was looking for a part and posted a thread where did it go or was it not posted ?

[mr_3_0_5]

in need of a 350x sprocket hub.
please contact me here or via email mr_3_0_5@yahoo.com

[gtoman071]

Plz help!! 83 ytm 200k. Need carb!!! Thanks, Cody 904-588-6496

[Moto Hose]

been a member for a long time but have only posted in the KXT and Tri-Z section

[Glen]

same here, been here awhile but never posted

[mac#81]

this is probably my first post so here it goes . I know who has a JW#31 trike and I'm not allowed to tell !

Well , how did I do ? (haha)

[Yenko502]

Rebuilding my 1981 250r ATC, hope to find others like me here..

[mac#81]

anyone out there have a TC Racing dual plug , big valve head for a 1983-5 atc200x that you don't want ?

[OKSTATE#1]

Cool site, in my Internet searches I have viewed plenty of what appear to be archive-type threads. Bought a 1985 Big Red two weeks ago, had one when I was a kid in the 80s and I always took good care of it then. Found a really nice one with good original Ohtsus, so I got to pick up where I left off 25 years later. I'm looking for what every other BR owner wants, another set of original tires and accessories lol. I have been a Willys jeep freak for years, so now I'm venturing into a new arena. So, I know how it is when fresh meat comes along wanting to get in on the action and find deals, blah blah blah. Just let me know when I'm one of
The cool guys and can start gettin in on all the little secret stashes of parts.....:Bounce

[epperson36]

I am not new to the sight. I know I went mia for a while but I still have projects and now that I am back into them after years. I can comment on the post I came here to find!! Sucks.. TRI-Z big bore dune monster build is my project right now. I shouldve started it sooner to have by dune fest but my automotive business takes priority. However my build is in my office so it can get this and that done when I got a minute

[yammerhammer88]

I wish the donation idea was possible as mentioned above but I like this site so the trials must go on lol,it would be nice to view the classified ads though because I would like to set up my profile with like a before and after pictures in the photo album but I need to find certain parts before I can do this. and share some of my trial and errors with other members who are doing the same or plan on doing like I do. I wish the classifieds were open to new members as buy only , not to post for sale, but to buy parts only until the trial period is over and proved ourselves worthy as new members to this site, I dnt blame administration one bit for this precautionary step though.

[johnathonmh]

glad to b apart of this website im currently stationed in afghanistan i have a 1985 honda atc200s back in the states im ready to get back plan on turning it into a mudd trike as soon as i get back!!!

[johnathonmh]

anyone on here tried to lift a honda 200s or have pics to see the easiest way to do it?:p

[Bird76Mojo]

I've been a member of this website since 2007. Mostly a lurker. Now I can't post squat or access the classifieds just to browse like I used to enjoy doing.

Been here since 07 and never caused a problem. What gives?

[Toyranosaur]

Brand new here, but much as I dislike Draconian measures to keep things square, it's sadly becoming more common so no crying from me (Sniffle.) :cry:

Never had more than a passing interest in trike ATCs, then today was driving home & saw a 1982 Honda 200 in pretty great shape with new rubber, so next thing you know it's in the driveway- For $250, had to own it! :Bounce It'll be a winter project, mostly clean, refresh, etc. I'm Super-Cheesed with it now! So found this place on the web & will soon beleaguer the more knowledgeable with tedious questions, like "What should my fenders smell like" and "Are tires available in Purple?" :p Chris

[LibertyorDeath]

I'm a new member, I just bought my first three wheeler, very existed about getting into it and for hunting season. I am also disappointed to find out im not allowed to access classifieds until 2 months and 10 posts. I was hoping to buy some parts before the season starts. Now I won't be able to until the seasons over likely. I understand the reason for the two months period but don't want to post 10 useless posts that waste space either. I dont have 10 needs for posts. Whats the point of not allowing people to connect and buy parts? Fact is, it's just going to increase the amount of junk posts. Anyone should be able to see this....
10 junk posts here we come

[LibertyorDeath]

I would position myself in the rear, grab hold of the rack and remember to lift with your legs not your back! Good luck!

[Toyranosaur]

.....One can only hope you're talking about ATCs.......:lol: Chris

[duck4twenty]

wow this whole time i was tripping like y cant i reply to som post, so i started reading on how too do so and just read u have to post at lest ten post and wait a two month period lol well i guess this will be my first post

[88RGuy]

well hello everyone.. and,, thankx for the heads up 3ww.. this site is awesome.. great work guys,and/or girls.. happy trails from Ohio... :)

[Smokinit911]

Hello, New guy here from AZ, I need help with a honda 185s decompression cable, I do not know how to or where to connect it back inside the coil starter housing. Any help would be greatly appreciated.

[KAWITAZ]

Reverse Trike fan here from MN!
Three wheelers are cool, but I had a go-kart and a mini-trike that were 2F1R like the Spyder, I never had stability problems (unlike Dirt Wheels)...Did they know how to ride?
I want to build a Quad based Reverse trike! (Very easy to make it Street Legal!)
Like someone here is already building.

[toddy]

ive been on here just over 2 months and have just over 10 posts and stil lcant post on anything else. any ideas

[coby6290]

Hey guys looking for some info on what color is the headlight guard supposed to be on a 1986 350x?

[88RGuy]

it is what it is.. 2 months is cool by me.. i hate spam and jerkoff people that scam on others... thanks for making a cool, useful site.. :)

[drdywhitboy]

I am having carb issues. I have a newer stock type carb,(has the weird bellows on top?) but the slide keeps sticking? It has been cleaned, new fuel used and will still hang up. I was thinking about trying to use a stock carb from some of my ATC/TRX 250r junk. Has anyone tried this? If so what jets and needle settings. The ES is all stock, just a yard/trail work toy. Thanks, Rick :wondering

[bullyinflorida]

Hello everyone,

1st post and a huge fan of the site and Honda trikes!!!!

I traded for a 350X with engine in the frame as you could say a "roller" but allot of parts, bolts and the brake systems that were stripped off to paint the bike came in a handy to carry 5 gallon bucket of mess.

My issue and reason for the post is the rear brake stay bracket and the two bolts that go threw the bracket are about a 1/2 inch of from center on the bolts when attempting to bolt it up.

I have the Honda shop manual, understand the 85-86 rear brake difference, bought a different caliper, and brake stay and still am off from being able to mount this.

Since the brake stay from the bucket and a different one I purchased are the same I am thinking that who ever rebuilt the rear axle may have, could have put a different rear axle bracket on? else it just does not fit and I would have to drill the brake stay bracket about a 1/2 a drill bit out, and i do not want to rig it since I am trying to make it a restored trail king.

I can take and post pics or email people to explain what the heck I am talking about but hope someone else has figured out this issue and can help me out.



email is Bullyinflorida@yahoo.com and I again can try to post or email pics or a video of what I am having an issue with

Thnx

[Yenko502]

any help for a 81 250r transmission problems?

[Yenko502]

my 81 250r isnt shifting. i believe is is a problem with the shifter drum.

[Jaymesbf]

I have a 1985 ATC 200X that had the motor rebuilt by a professional. There was a rattle that started at high RPM's and when I called the guy who rebuilt it, he said that it was probably the cam chain. I loosened the adjuster bolt on the left side of the motor just a bit (like my manual instructed me to) took it for a little ride, revved the engine a bit and it just locked up. The motor seems seized because I can't move the kick start lever at all. I was just wondering if anybody had an idea of what it could be or what to look for before I have to tear it apart or pay for it to be done again. Any thoughts, suggestions or ideas would be greatly appreciated.

[FRANKENMARO]

I am having carb issues. I have a newer stock type carb,(has the weird bellows on top?) but the slide keeps sticking? It has been cleaned, new fuel used and will still hang up. I was thinking about trying to use a stock carb from some of my ATC/TRX 250r junk. Has anyone tried this? If so what jets and needle settings. The ES is all stock, just a yard/trail work toy. Thanks, Rick :wondering

wetsand the slide with 1000 gritt in direction of travel lightly then wipe down with machine oil and dab machine oil on cable in such a way that it runs down into the casing of the cable incase the cable is sticking n work everything back and forth repeatedly to free it all up, or are you talking about the plastic slide? thats vac regulated you may have a leak in the pre vac bellows if i\\the slide is sticking sticking open. also wetsand that slide and lube with machine oil inside carb and on slide. thats how i get em working again... ive got a 250es clone with exact carb. im planning a future old 80s 250 sto stroke mikuni 56mm conversion

[coby6290]

Ok learning more about the site everyday.

[wifespissed]

Hi guys i just wanted to say i think this forum is great . I am currently restoring a 84 tecate 3. I use this site to learn various things from you guys. I cant wait till my two months is up lol

[wifespissed]

From what i gather you have to be a member for two months and have at least 10 posts.

[Dave_D]

This is going to be a long 2 months :( lol

[Liquid-Darkness]

Thats cool. I hope to get my account fully working so I can post all the juicy details about my new trike when I get it in a few months.


Update: I found my old username!!! I can post lol.

[mad1983250r]

im new to this site have many questions on my 83 250r .

[sandspider25]

New to site but long time trike enthusiast.

[theboy12]

Hi everyone, trolling for about six months, I have five trikes now with a sixth on the way. Just decided to get my two and ten started. Lots of info on here, thank you for that.

-Jon

[3isthewaytoB]

I love this site and will b more than happy to wait to b turned loose

[hoosierlogger]

I love this site and will b more than happy to wait to b turned loose


While you are waiting you should read this thread.

http://www.3wheelerworld.com/showthread.php/9639-For-the-love-of-God-Don-t-type-like-an-idiot!?highlight=Capatilization

[czac]

i worked dept of corrections and didnt have this much back ground done

That shows you just how bad our prison system really is... lol

[czac]

While you are waiting you should read this thread.

http://www.3wheelerworld.com/showthread.php/9639-For-the-love-of-God-Don-t-type-like-an-idiot!?highlight=Capatilization

"Webonics" lol I love it!!

[czac]

...and then, all your friends will be there and it will be a huge celebration and everyone will eat and drink and say "Congrats kid, your one of us now. Welcome to this thing of ours".

(Opps, wrong "Becoming a member" description) lol,lol,lol...

[3isthewaytoB]

Love this site

[3isthewaytoB]

Sorry about that. I agree.

[200x flatrack]

Well worth the wait and it will give me time to get to know the site better. Thank you for a great forum

[ATC90JAY]

Thanks!!! I'm glad to be a new member!!!!! This site is awesome!!!!!:Bounce

[Mudduck]

ok guys i just joined the site my name is rich i will be more than glad to wait the 2 months an will not post bs on the site, im more of a car guy im getting back into the 3wheeling with my son im 41 an by far no tire kicker. with that said im looking for parts for the 2 honda 200X im getting going for me an my boy looking for the 2 rubbers that go on the gas tank mounts that the rear fenders an seat hook on to... anyone please help

[Howdy]

ok guys i just joined the site my name is rich i will be more than glad to wait the 2 months an will not post bs on the site, im more of a car guy im getting back into the 3wheeling with my son im 41 an by far no tire kicker. with that said im looking for parts for the 2 honda 200X im getting going for me an my boy looking for the 2 rubbers that go on the gas tank mounts that the rear fenders an seat hook on to... anyone please help

These are still available from Honda. I probably have a few used ones a little cheaper though. ;)
Howdy

[NewHonda ATC]

this is bull crap i cant reply to some posts !!!

[90guy]

this is bull crap i cant reply to some posts !!!
Wow calm down.... We all went through it...

[Blue Viffer]

Been on quite a few forums but this is the first I've been on with this rule. In one way I like it and another I don't. Your sandbox and your rules. It will keep out the spammers and some that are not as dedicated.

BlueViffer

[Blue Viffer]

Ok here's my story. I am a Honda Automobile Mechanic. I got into 3 wheelers in 1983, the guys I worked with were going to Pismo every month and invited me one trip. I was put on a 185s with a group going for a ride on Friday night after we got our camp site set up. Did well that first ride only dumped it twice trying to keep up with the other bikes (6 250r's) while upshifting while trying to down shift. The group I rode with would always have an experienced rider at the back to help anyone that fell or got lost.
After digging the big fish hook out of my throat I was at the Dealer on Monday and bought a 83 200x. I had figured it would be my wife's bike and after a learning process I would get a 250r. The next week we had our own truck and camper. The following we had a trailer to tow the bike on. About 4 months or 4 trips to Pismo later I got the 250r. Picked up a 300 kit and sent it to Curtis Sparks for some play porting. Decided to ride the 250 as it was for a couple of trips. What a mistake. It was so pipy that when I put the 300 kit on it was heaven.
Fast forward about ten years and a Divorce, sold or lost everything. Got into street bikes hence the Blue Viffer. Fast forward another 10 years now my son is back into 3 wheelers. He was put on the front of mine when he was 13 Months old and could not get enough in those days. He had also rode street bikes with me. Anyway after he got back into 3 wheelers he would call and tell me what he was doing. Ask if I would move out to where he was. And entice me on visits with renting quads to ride Jeep trails with him and his family. Finally this last year he talked to his Step Mom and asked if we would come out if he got me another 3 wheeler.
So he went and did it he got me a 1983 250r with a 300 kit. He was going to build it up and invite me out to Little Sahara Mosh 8. Well he didn't quite make it. He passed on in November.
I decided to keep the bike and get it back together properly with help from one of his friends. This is going to be my therapy Bike. I am going to be the Old Guy back on the sand and hopefully will have it together and not embarrass myself.

Blue Viffer

183675

[Blue Viffer]

Here I am in the old days with my first 250r at Pismo.

183676

Blue Viffer

[DohcBikes]

Go to the new member discussion and post. You will get many responses to posts with pics!

[Blue Viffer]

Go to the new member discussion and post. You will get many responses to posts with pics!


Thanks.

Blue Viffer

[Tomcall]

I wish I read this first. I have been trying to post and getting the message that I can't and scratching my head.

[Darynr]

how do i ask a question about my three wheeler?

[Darynr]

how do you post a question?

[treewheels]

should be 5 posts not 10 IMO :)

[WILL_S]

Hi
Trying to get my 10 so i can pm:)
Cheers Will

[Kkaiser]

Sounds like a good idea

[Mr. A]

So, I've been on two months and wanted to see the classifieds. Now it seems I have to have 10 posts also. I don't want to post 10 times. I don't like to type, or talk to people. I like to read the posts, not post. I get most info I need just by reading. Love the site tho. Ok, 9 more to go.

[bryan84]

hello everyone this is a great site i love 3wheelers

[Holeshot]

Well there goes my tri z rebuild with no access to the classifieds hmmm… I thought for sure there would be my hard to find parts on this site Im sure there is with no access Im defeated Im subjected to ebay yup can't even trade out my dups are trips for parts to finish my rebuild

[WILL_S]

Almost 4 years and finally post 10:postwhore
good things come to those who wait
Cheers Will

[Blodg]

Almost 4 years and finally post 10:postwhore
good things come to those who wait
Cheers Will
LOL, I am going on a year-and-a-half member but only making my first post. I like reading.

[kennymp3]

LOL, I am going on a year-and-a-half member but only making my first post. I like reading.
Same here! I had no idea there was even a classified section here. So it looks like I have 9 more posts to go

[Blodg]

There used to be a classified section but now I don't know if they don't have it anymore or if I don't have enough posts to see it although I am over 10 now.

[atcdude0]

Isnt this just going to mean a lot more rubbish posts just to get the ten. Ive spent 2-3 hours a night on here but never needed to post, now I do.

Yeah, that's true, but it also weeds out the people who are never going to actually use 3ww. Its a good site; I've used it for a while without being a member, and its worth posting ten things to become a member.

[atcdude0]

How do you add a profile picture?

[Tri-Z 86]

definitly makes sense good way to weed out the spammers

[dpef11]

There is a ton of useful info here, however site is difficult to navigate. This ten post thing isn't all bad but don't see how it teaches you how the site works. Shows how to post in one area. Hope this doesn't affect any replies to my threads, as it is only my opinion. My 84 tecate is having clutch problems. Had to replace cable, then the return arm started sticking so I pulled it n greased it, still was sticking. Then I was ridding and something seemed to slip. Now the shifter won't come back up on its own or go into gear. Motor runs fine. Not sure if any of these events are related but just trying to give as much info as possible. Any help would be great thanks.

[El Camexican]

Guys, just keep posting. You don’t have to post a thesis every time. Anything with more than ten letters will do. Hurry up and earn your merit badges!

[250r86]

Guys, just keep posting. You don’t have to post a thesis every time. Anything with more than ten letters will do. Hurry up and earn your merit badges!

I am a new member here and have a nice 86 200x. I also have two 250r 4 wheelers. I am a member of both 250r forums and have never had a waiting period on any of their sites. This is new to me.

[El Camexican]

I am a new member here and have a nice 86 200x. I also have two 250r 4 wheelers. I am a member of both 250r forums and have never had a waiting period on any of their sites. This is new to me.

It's worth it. Keep posting and welcome to 3WW!

[Jim Dunn]

Reckon I made a mistake! I found this forum this morning and was reading some info about electrical problems on 1984 Big Reds, just the info I was needing. Then I went and registered and lost my place for the good info and can't get back to it. Anybody got any suggestions on how I can find those post. As I see it now, I guess I won't be able to ask any questions about my problem for 2 months. Is that correct? I'm not even sure I'll find my way back here if you answer this.

Jim

[hoosierlogger]

The search function should get you close.

[LucasGrys]

Sounds good my trike projects have kind of been... dormant but now im back with a bang! In 3 days I Purchased a 84 200Es Rust bucket and a 200ES trailprotrailprotrailprotrailprotrailprotrailprotr ailpro SHOWROOM JEM! Just today i got my 200M running aswell. Looking forward to talking to you all and helping others with my knowledge about these beasts!

[waynekreitzmann]

I didn't even know there was a classified section this is the best news I've heard all day

[waynekreitzmann]

So after you've served your penance how do you find these so called classifieds???

[Toooony]

Well here goes post #1 I just bought a 1981 atc200 and am having a rough time finding a new foam seat. Any help would be greatly appreciated.

[Toooony]

O!! where can I find the cover for the pull start?

[Toooony]

How Rude of me ... forgot to introduce myself. Whats going on people?? Im new to the trike world and cant wait to get mines up and running. I live in Louisiana/USA im 31 yrs old and everyone calls me Tony. I don't really do a lot of posting but seeing how theres a 10 post min.. ill be meeting the requirements =)

[DohcBikes]

Don't forget to post in the new member discussion and the new member commencement areas guys!

Welcome to 3WW!

[sharky55]

I just can't wait until I can get into the classifieds to see if I can get me a trike in my area

[rdonald1979]

New member here just posting for the fist time. Hello everyone. Ryan from Atlantic Canada.

[jakep53]

welcome to 3ww

[Speedmax1940]

I kinda think this 10 post thing is stupid also 2 months is a little long. i joined to get advice today not in 2 months. The only post I wanna make are about my 225 dx. Instead I gotta post ten pieces of crap and wait too months :(

[elvetost]

Hey just a little suggestion by a newb here...
I did read all the "starters" and have done my intro and even started a "build thread" before I posted this.
My self I found it perfectly logical to do so and get me started.
However, (and this is my suggestion), after reading the first post on this thread, some people (maybe foreigners?) do not understand that while in the first 2 months they can not post in most parts of the forums, there is nothing stopping them from starting a new thread in the member's commencement are and ASK FOR HELP, Parts or whatever they need.
So possibly adding this in plain english in the first post telling them to do so might make their life easier and ease the "you cant post" anxiety for the first months.
I know its worked for me. :)
Hope you guys find this "logical". Just me 2c.
Cheers,
Chris

[mouse24]

I'm finding all kind of good info for my '85 250 sx

[shoutzy]

i really wished i red this before ive been a member for almost a year and never noticed this

[franksimons]

its the rules get used to them and enjoy yourself's why wine and complain about things? just follow the rules and there are no issues u still get the help u need in new member's area i know i do.

[slowride]

I have am a new member and see the arguments for both sides but either way I am going to be around for more than 2 month's. This is one of the better forum web site's out there for knowledge and people so I'm hooked and love my wheeler.

[iceriderdave]

posting 10 post is not that bad.

[veganewstar]

thankyou for this web sight i cant wait to get working on my Tri z 250 i just pickd up. Hope i can find some help on how to get it going agin.

[El Camexican]

thankyou for this web sight i cant wait to get working on my Tri z 250 i just pickd up. Hope i can find some help on how to get it going agin.

You'll love it here. Besides tons of info on trikes they also hold an on-line spelling bee every Monday at 8:00pm CST.

[DohcBikes]

posting 10 post is not that bad.To steal glamy's line,,,LOL, OMG, I KNOW RIGHT!!! BUT HEY, AT THE END OF THE DAY......... it takes me at least 24 hrs to make ten posts.


lol.

[DohcBikes]

You'll love it here. Besides tons of info on trikes they also hold an on-line spelling bee every Monday at 8:00pm CST.

LMFAO!!!!!!!!! What a cordial welcome party E.C.!!!!!!!!

[El Camexican]

LMFAO!!!!!!!!! What a cordial welcome party E.C.!!!!!!!!

I cant hep mishelf at timez.

[Suzuki637]

I am new to the cite and am not sure exactly how/where to post technical 3 wheeler questions

[Crazyktmmatt]

Where would I find the classifieds?


Itching to buy stuff I dont need lol

[gbpitch]

Working on a Pacesetter III. Motor has been ordered. Putting in an 11hp. 197852 197853 197854
So far and I hope final costs... (Pacesetter was free) new #40 chain $14.00, $105 for all new bearings(they were mostly hex shaft and a booger to find), $63 in shaft locking collars, new Predator motor $300. So many hard hours getting this back to condition. I will NOT do another one.

[Tina315hxc]

Hopefully after a few more posts I can finqlly reply to other peoples threads

[QUASIMOTO]

More spam from Tina315hxc!

[jase4299]

I fully agree with you, more bs posts and those who have been members for a while and don't like to clutter up the board now have to post just to be able to post elsewhere where they might actually be able to contribute.

ok guys , iv got a 84 225dx 3wheeler, the gear spline is worn out no teeth left...so the gear shifter doesint work, trying see how much of a bittch is it put in a new worm spline in or the easy way just do some spot weilds on the gear shifter 2 the spline?? im a weilder 17years, so that take me about 1min to fix, so what ya'll think?

[jase4299]

any one know?

[New2Tri-Z]

any one know?
Yu posted your questions in the wrong forum. This should be moved to the New Member section. All members will get to read it as it will show up on the Whats New page. Be patient and post in correct areas and welcome to the site :welcome:

[hoosierlogger]

I don't see anything wrong with a spot weld. Just don't completely lay a bunch of bird trailprotrailprotrailprotrailpro on it. You want to be able to take it off if need be.

[ghost_flamz]

That explains a lot
In an effort to help new members familiarize themselves with the site and some of our habits here we've introduced a trial period for new registrations. During this trial period you'll be limited to this forum, the Introduction forum, and also Site/Feedback section if your having problems. Veteran members will be available to help answer questions, and you'll still be able to search and read in other portions of the site but you will be limited to posting in these areas only. Full access to post in the rest of the site is of course still 100% free. We only ask now that you spend some time in these areas first and learn more about the site first before we turn you completely loose. Those requirements are:



A registration time of 2 months or more.
At least 10 total posts on the forum. If you had existing posts before this was implemented, they will count towards your total. If you are new, then you'll need a total of 10 posts in the three above mentioned area before your given access to post elsewhere.


Again, you are still available to read all of the other existing threads and posts on the site, you just are not able to reply to them or make new threads until these requirements have been met.


Thanks for your patience and glad to have you here at 3WW! :)

[oldcodger]

Hi, I suppose I am what you call a "newbee". Not quite sure what a "post" is! Is that what I'm doing now by responding in a thread? Or, is a "post" the starting of a "thread"? I'm seventy three, and not sure I have enough time left to bring up ten different "posts". I have ben a member for two years and have enjoyed browsing the site on some occasions, mostly because of the two ATC's that I'm trying to decide what to do with. I have made a "post" asking for help titled "How old or rare is that US90 or the ATC110?", but have not learned much from it yet! Give me some insight as to what I might do and how to proceed.

[ps2fixer]

Hi, I suppose I am what you call a "newbee". Not quite sure what a "post" is! Is that what I'm doing now by responding in a thread? Or, is a "post" the starting of a "thread"? I'm seventy three, and not sure I have enough time left to bring up ten different "posts". I have ben a member for two years and have enjoyed browsing the site on some occasions, mostly because of the two ATC's that I'm trying to decide what to do with. I have made a "post" asking for help titled "How old or rare is that US90 or the ATC110?", but have not learned much from it yet! Give me some insight as to what I might do and how to proceed.

Posts are the responses, and a thread is the whole collection of posts wrapped under one name (the link you click to get here). As of the time I'm posting this, you need 3 more and you will be able to respond in the other sections of the site since you have been here a long time :). I'm glad you are at least putting forth effort to learn this new stuff, my uncle is around 55 and complains he can't do anything on the computer, yet he puts no effort into learning it.

Oh just to make sure every thing is clear, on your post above this, right under your location is your post count, the total number of posts (including threads you started) on this site. At 10 you will be a "full member".

[oldcodger]

Hi again ps2fixer, in the interim between my last two "post" I have ben reading all 26 pages of this "thread". I didn't realize there was more that one page to it when I first arrived, so I guess I'm learning! Your current posting is by far the clearest and most informative posting of the bunch!, One observation that I might make a suggestion about is the added time it takes to reload each page, makes the reading very time intensive. For me about an hour and a half to read all 26 pages! Most of the time was reloading the cover sheet I believe, should be a way to make that reload faster. thanks again for your effort.

[ps2fixer]

Hi again ps2fixer, in the interim between my last two "post" I have ben reading all 26 pages of this "thread". I didn't realize there was more that one page to it when I first arrived, so I guess I'm learning! Your current posting is by far the clearest and most informative posting of the bunch!, One observation that I might make a suggestion about is the added time it takes to reload each page, makes the reading very time intensive. For me about an hour and a half to read all 26 pages! Most of the time was reloading the cover sheet I believe, should be a way to make that reload faster. thanks again for your effort.

Thanks for the positive comment, I work in IT (Information Technology, basically work with computers all day), so I try my best to explain things out, and since you told us your age, I tried to keep the youth out of my message (I'm 26).

As for the pages, sadly we as users don't have control over that, not the fault of the administrators of the site, this software does not support users to configure the number of posts per page. However, it sounds like you might have a slow internet connection like dial up or a low "high speed" DSL package. Here is something you can do to make the pages load a little faster by having less stuff on them. At the very bottom of this page there is a drop down that says "---- 3WW Version 3.0", change that to "-- Vb4 Default Style" and the large image at the top and such won't be there anymore. This is called the skin, which is basically the general look of the site. If you don't like the different look, or it does not help, you can always switch back.

Good luck and let us know how it turns out :).

[buck420]

Getting my 10 posts in lol

[ps2fixer]

Getting my 10 posts in lol

There isn't any content in your post, the admins might count it as spam. I'd suggest going to the new member section and welcome some members to 3ww and comment on photos etc. At least then you have legit posts and no risk of infractions/warnings.

[4bratsdad]

im having trouble posting or replying its been awhile since ive been on just got internet back on this is 1st thread that had the reply option ??

[ps2fixer]

im having trouble posting or replying its been awhile since ive been on just got internet back on this is 1st thread that had the reply option ??

Looks like you are still under the new member trial period (under 10 posts). You're limited to where you can post/reply till your post count is 10 or more.

[jesseatcman]

I am completely okay with this. I have got lots of useful info from just reading old posts. Still learning the site though.

[Patmc]

So after 10 minimum posts and 2 months achieved, when does rest of site open up?

[hoosierlogger]

It opens up to a whole lot more. Classifieds, open chat, awesome builds...... Way more than you are seeing now.

[Patmc]

But does it do it automatically or does someone have to flip the switch lol..

[Grammabud]

WOW...I tried to register and found out I registered in 2009. Don't remember that.

Anyway, I'm interested in converting a three wheeler into a two wheeler. A true ATC.
First, can anyone tell me which trikes have rear suspension and chain drive.

Many thanks in advance...

[onformula1]

A BIG Thank You to- Billy Golightly for helping me get on the forum (had a few issues)

I love this place!

[jakep53]

WOW...I tried to register and found out I registered in 2009. Don't remember that.

Anyway, I'm interested in converting a three wheeler into a two wheeler. A true ATC.
First, can anyone tell me which trikes have rear suspension and chain drive.

Many thanks in advance...

atc 200x, atc 250r, atc 350x

[Grammabud]

atc 200x, atc 250r, atc 350x


Thanks Jakep53...That was a sudden answer.

I'm gonna like it here.

[jakep53]

Thanks Jakep53...That was a sudden answer.

I'm gonna like it here.

this is a great forum! great bunch of guys on here

[nilesj]

...............................................

[deano56265]

Hi all!! is this where i start with my posts?? I have just bought 2 honda atc 200's an 82 and 83. Had a question about the decompression cable. Does it need to work and if not does the lever have to be in the upright position?? they will both take some work to get running ...luckily there are alot of repair videos on you tube.

[jakep53]

Hi all!! is this where i start with my posts?? I have just bought 2 honda atc 200's an 82 and 83. Had a question about the decompression cable. Does it need to work and if not does the lever have to be in the upright position?? they will both take some work to get running ...luckily there are alot of repair videos on you tube.

welcome to 3ww you do not need a decomp cable it does make it easier to start but plenty of guys run without them....to run it should be down not up!

[110200]

Wait so we can only post in what areas

Sent from my YP-GI1 using Tapatalk 2

[jakep53]

Wait so we can only post in what areas

Sent from my YP-GI1 using Tapatalk 2

You can only post in the new member for the first 2 months and 10 posts but after you have reached these 2 you have access to the whole site!

[bajarascal]

I completely understand the idea, and think it is great.

[bdf136]

Post #1 This is so much fun

[bdf136]

Post #2. Getting even more fun.

[bdf136]

Post #3. Who likes banshees?

[bdf136]

Post #4. Freddy said you better lock your door.

[bdf136]

Actually, this is post #6, sorry about skipping 5, but apparently I did post on here once before.

[bdf136]

And lucky number 7...here it is.

[bdf136]

Number 8 - isn't this great?!

[bdf136]

Number 9 - man, is this fine!

[90guy]

Good way to earn a good reputation right off the bat....

[bdf136]

Boom! Number 10 - FOR THE WIN!

[ps2fixer]

Post #2. Getting even more fun.

The idea is to keep SPAMMERS from spamming up the good content of the site. Don't spam to get your post count up -_-.

[H Layton]

Hello everyone,
Since I have to post at least 10 things before I can get to the classifieds, I will start by introducing myself.
My name is Hunter, I am 27, I live in Arizonaand I own a beautiful 1985 ATC250R.
I polish TRX and ATC 250R fuel tanks in my spare time for cash in an effort to buy my kids a trx70, and an atc70 for myself (to ride along side my kids).

I have posted a couple of times in the past on this site, but I don't really mind the formal wait period, because I know that this site is the best place to connect with other ATC owners and swap stories and photos.

207049

[JACKO_ATC]

Hello there 3WW family!

I have been reading through some amazing information and story's from you guys for a little while now and have really thourally enjoyed it, seems like a very nice place/site to be apart of especially for the love of three wheelers! Just thought I mite chim in and introduce myself from across the pond.
My name is Jacko I am from Australia and have a strong passion for three wheelers since I was very young! 3 yrs I beleave [emoji6] and I also very clearly remember my dad riding a restored Honda 84' atc70 up our drive way one Christmas morning on the back wheels [emoji14] (he raced a 86' 250r flat track and other speedway) I loved the trikes and have been hooked ever since.
I currently am starting to get back into these awesome machines and have wanted to for quite some time.
At the moment I have two 74' 70s, one is fairly neat and the other is all original but in need of restoration.
I have plans of an 87' 200X and a 86' 250R in the near future...
Can't wait to start restoration on the 74' 70 and I will be sure to throw up some pics of the restoration and my other machines for you guys when I start and pick them up.
Very happy to be a part of the site and look forward to a long and happy 3ww relationship[emoji1]

Jacko_atc
PS you SoCal guys rock!

#9 to go before I get to see the good stuff!?[emoji15] can't wait!

[JACKO_ATC]

Sorry about posting in the wrong thread not used to the forums. Mabey someone will kindly move it for me.
Cheers

[jakep53]

Sorry about posting in the wrong thread not used to the forums. Mabey someone will kindly move it for me.
Cheers

Welcome to 3ww mate good to see another Aussie!

[H Layton]

I polish ATC250R and other plastic fuel tanks.


207137207138

[H Layton]

I have owned my 85 250R since I was 16. I convinced my parents to purchase it for me from a local shop owner. Another customer had commissioned the build, and split on the bill. My parents bought it, and gave it to me for my 16th birthday. I have had it for the last 11 years, and I hope to leave it to my kids one day. This 250R will never bee for sale.207139

[H Layton]

I buy/trade 250R parts, clean and polish them for fun, then sell them on eBay and Craigslist.


207140207141207142207143

[H Layton]

I plan to purchase a TRX70 for my children, and restore it myself.

[H Layton]

I have started 2 atc70 builds and have ran out of money both times....

[JACKO_ATC]

Welcome to 3ww mate good to see another Aussie!
Hello jakep53,
Thankyou and yep agree not to many of us around here.

Those 250r parts looks tidy mate good on ya! Yea the 70s are awesome!

Cheers
Jacko

[Honda_4me]

First time caller long time listener just picked up my 2nd 1985 BR

[Honda_4me]

Hello H Layton could you give me your Ebay name and I will follow you on Ebay

[dirtfan07]

Rubbish post #1

[dirtfan07]

New member.... #2

[dirtfan07]

I really wanna talk to the guy who built the 200x w/ a 200sx motor.... #3?

[dirtfan07]

Just found this site today. LOVE IT... #4?

[dirtfan07]

I still have my first ATC; a 1982 Honda 70. Was bough brand new for me for my 10th birthday by the best grandparents ever. Currently being restored for my son....#5?

[HIGHMARK]

This is a great idea, hopefully it helps weed the bad apples out. I can hardly wait until I hav access to the classified section, I need some parts.

[HIGHMARK]

Picking up another trike for free. Atc 70, can't wait to get it running

[HIGHMARK]

Really wanting to check out the classified section

[HIGHMARK]

The wait is very painful.

[dirtfan07]

Yeah, ditto on the classifieds. I need a 200x chassis

[BigredRob]

This is great i am finally a remember, I should have joined years ago, wish I could post on other threads tho !

[cdrookie]

Really wanting to check out the classified section

wer dat. been a registered member for 10yrs, lurking mostly on and off. no use posting anything since nobody ever listens anyways. but could use some act 70 parts.

[senzala]

Hi, I'm still learnig this forum so i apologise...anyway someone of you ask me more photos and videos of my italian sand trikes , of my prototypes and my snowkit.At moment i'm not able to arrange a new post on this forum but i just realise the unique video of italjet rambo 350cc on youtube.Anybody can help me to post it and start writing as well?tks this is the link
http://youtu.be/DKKm_Z1yl60

[senzala]

http://youtu.be/DKKm_Z1yl60

[SMD753]

Hey folks new to the site been three wheelin' since the 70's ...yeah I'm that old!
Anyway if anyone knows where I can find an authentic Dunecycle roll bar or frame (springer) please let me know.
I was a dealer in the 70's and raced for a while (had to go support myself....that kinda ended it).
I am re-build/engineering a dunecyle at the moment and need a few parts. I might be interested in a whole machine depending on location and what parts are good. No engine needed unless you have a mac 101d!

[davenichole]

so I have to make at least 10 posts here to reply to anything else?

[scrambler250R]

Well Dammit I've been a member since july 2008, I read & learned lots of valuable information on here over the years. Who knew I hadn't posted 10 times in all those years:wondering! Guess I'm off to bust 10 in small talk.:D

[86350xpilot]

Appreciate the info. Thanks

[pickup-truckin]

Joined to post on the "whats the 125” thread because I can contribute a lot to it...and now I can't. Awesome. Someone show me where to undo the past 10min of registering please

[pickup-truckin]

And don't forget the two months of "marinating" to become a member on top of the minimum posts. All of this should have been made obvious in the info start page, not in the fine print

[Yamawheeler]

So I have to post ten times in this post or in the new membera forum?

[thcowboy]

So I have to post ten times in this post or in the new membera forum?

It doesnt matter where you post here or new members forum Hey new members, it took me a little over a month to get fully registered. All I did was be on most everyday for a little bit and post a little bit:TrikesOwn

[Yamawheeler]

Well thank you for the info. Hopefully I'll be able to be a full member noe

[scrowdogracer]

Question...If you don't post much will you still become a member??
I do way more reading daily than posting .Do I need to post everyday or can I just troll all the good reads and put my time in to become a full member.

[90guy]

Question...If you don't post much will you still become a member??
I do way more reading daily than posting .Do I need to post everyday or can I just troll all the good reads and put my time in to become a full member.
You can put your 2 months in. Just need 10 posts within the 2 months then you get the whole forum open and can just post whenever you want to.

[scrowdogracer]

Ok thank you that what I needed to know ...

[jrooster]

thanks to the help of mods i finally figured out how i can start posting after a year of reading lol thanks

[Degoragon]

You guys must really had a big problem with scammers and trolls here. I didnt expect a atv (atc) enthusiast site to have so many safeguards to enter. Ive been a part of more personal fourm sites that had less hoops to jump through than this. Im not complaining, im just surprised. That other site could use a system like this, especially considering how personal they get.

[davenichole]

where can I look to find the date that I joined?

[davenichole]

well, I believe I just found that info in my comment.

[BigFrednR]

Been a memeber since 2007....this will be my 11th post!

I remember being able to access the classifieds. I sold my 250r through the classifieds here. I took a pretty long break because I was 3wheelerless for a few years.

I was wondering if someone knew the lug nut size for the Big Red, and had to post in it in the new member area. I still haven't received an answer so I just ordered the lug nuts and hope they are right.

How long after my 10th post do I have to wait to access and post in the rest of the site?

[tp44]

If you try posting a thread in the new member commencement, should it appear automatically or does it have to get checked first?

[efatka]

So it is two months and ten post for full membership rights? Do edits count or does it have to be a comment or new thread?

[Bobbywolf]

How does the post review process work? I spent some time typing up my exploits on my newest project, just to have it held back to be reviewed. Will edits to this post get reviewed as well?

Does this review nonsense stop when I finally make it to 10 posts? (I've been registered for years)

Thanks, just trying to see how this forum works now.

[hoosierlogger]

I don't know how it could be any more clear. You need 10 posts and 2 months of membership. If you have been a member for more than 2 months, you only need to get your post count up to enjoy the full site.

[Howdy]

How does the post review process work? I spent some time typing up my exploits on my newest project, just to have it held back to be reviewed. Will edits to this post get reviewed as well?

Does this review nonsense stop when I finally make it to 10 posts? (I've been registered for years)

Thanks, just trying to see how this forum works now.

Some postings are selected by the forum software / programming to be reviewed by the moderators / admins before going public. I have some of mine selected as well. This is done as a means to help stop spammers. It's not perfect programming, but we do try to get the valid postings approved asap. All the mods and Admins have other things going on ( Family, work, hobbies, ect ) as well as helping run the site ( we help for free ).

Please be patient and we try to get to things as soon as possible.
Thanks
Howdy

[Bobbywolf]

Thank you Howdy for clearing that up.

Rob

[Hunting Chip]

Just to be clear...What if you have 9.5 posts and have been a member for 1.5 months? Hahaaaaaaa

[newto3]

glad to be here.

[Missyr]

I'm trying to find anyone that can help get our 2 trikes to trike fest this year we live in upstate New York

[DMcC350X]

I am new to this site but certainly not new to 3 wheeling or wrenching on them. I bought into your club before it existed with a (at the time) 3 year old 1984 Yamaha 200el. still have that trike and have had many since then including my most recent project...a 350x let the good times roll.

[AtcMuff]

omg i just got back to 3ww and this 10 post thing is understandable but i have been a member for 6 years. I do more reading than posting.

[AtcMuff]

I do like the new site

[AtcMuff]

maybe soon I can post again.

[AtcMuff]

i fill that I have to waste post to get to 10

[AtcMuff]

lets see if that does the trike

[gimmeamidget]

Does anyone know if a chain tensioner from an atc70 will work on a trx70. I know the trx is rubber but mine is chewed up and bent and slipping the chain. I actually prefer the gear type on the atc. Will the atc bolt on the trx?.....I could just pull off and swap but was hoping somebody has already tried it?

[gimmeamidget]

Also need full plastics for 86 trx70. I found on Amazon for around 400 bucks...anyone know of a better deal? Seems pricey for small plastics.

[TRE8815]

well... I just found out why I cant post anything... can an admin message me plz, thanks.

[TRE8815]

10th post from a member since 2010, Will be posting more often lol. thanks

[trappertrike330]

I just got a trike for free needs a carb and not sure what carb is on it and i know its a 185 but not sure if its the 185 or 185s

[ps2fixer]

I just got a trike for free needs a carb and not sure what carb is on it and i know its a 185 but not sure if its the 185 or 185s

It is best to start your own thread to get better viability and to keep each thread on a single topic, however to answer the 185 vs 185s thing, it is only based on the year if there is an "s" at the end or not. Besides that I don't know of any other major differences.

For the carb, there should be some numbers on it some where kind of like a model number. The service manual generally says what should be on it factory, I'm sure if you made a thread about it and posted up a few photos someone could ID the carb, or at least say if it is factory or not.

[3R Better]

This kinda sucks cause i am not a new member but i cannot remeber any of my info life has gotten in the way of my three wheeling for the last 5 or so years .... i just bought a 200x in almost ridable condition so i started up a new account 😢 only takes a few to ruin it for all.

[gman0201]

I have a honda 200x and i,get spark for a second and then,loose spark again

Sent from my SM-N900V using Tapatalk

[HardAche]

I'm new here and just wanted to say thanks for allowing me to join. I'm also new to this forum posting and I'll try to get better at it. I have a 1986 ATC 250ES with a newly rebuilt engine, brakes, front and rear and bearings all around. I have a pickle and can't seem to find help anywhere so I've turned to using Google and found this forum. My pickle you ask????....... my drive shaft! It was broken when I got it and bought new from Ebay but it was too short and the end that goes into the final drive is way too big.
I can put a quarter in that end and it will not fit into the opening. The new one is the size of a fifty cent piece easy. I'm thinking a change was made to my rear end?? Any suggestions?
Thanks,
Ron

[ps2fixer]

I'm new here and just wanted to say thanks for allowing me to join. I'm also new to this forum posting and I'll try to get better at it. I have a 1986 ATC 250ES with a newly rebuilt engine, brakes, front and rear and bearings all around. I have a pickle and can't seem to find help anywhere so I've turned to using Google and found this forum. My pickle you ask????....... my drive shaft! It was broken when I got it and bought new from Ebay but it was too short and the end that goes into the final drive is way too big.
I can put a quarter in that end and it will not fit into the opening. The new one is the size of a fifty cent piece easy. I'm think a change was made to my rear end?? Any suggestions?
Thanks,
Ron

First I'll say welcome to 3ww! Second, it would be best to create a new thread to get more people to see your issue.

However... I deal with parts a bit and have never seen that large of a size difference in the drive shaft. 85-87 250es all had the same size pinion join (part the drive shaft goes on in the rear end), and a TON of other machines from the same erra has the same part number including the early shaft drive quads and 250sx. Going purely on memory, I think the normal rear end side of the drive shaft is pretty large, not sure about a fifty cent piece fitting, but a quarter probably would or be close.

If you could upload some photos of your rear end, broken drive shaft, and the new drive shaft, I'm sure someone will be able to spot what happened.

This is what the OEM drive shaft should look like -> http://www.ebay.com/itm/Honda-ATC-250ES-250-ES-BIG-RED-3-Wheeler-OEM-Rear-Driveshaft-85-1985-1093-/151863618710?hash=item235bc6ec96:g:AhYAAOSw14xWLqP P&vxp=mtr
Maybe the seller listed the part you bought incorrectly? The drive shaft is no longer made, so unless you bought a NOS (new old stock) one which should have went for insane money ($200-300+), you either got the wrong model or a used one from something.

[HardAche]

Thank you sir. I've looked at all of the one's on Ebay and they all are basically the same as the one I purchased. I've come to the conclusion my rear end has been "rigged". Ok so I've added the pictures for the drive shaft here and I have made an album of the differences in hopes of getting some feed back. Any help would be greatly appreciated. I had one back in high school and thought this would be cool to ride with my son....he just keeps laughing as he rides by the shop on his Can-Am 250DS. Thanks again.223183223184223211223212223213

[ps2fixer]

Pretty interesting, I don't know any other machines that interchange, but I know honda stuck with the same style diff for years and years. Does the swing arm look correct to ebay listings? 86 is different from 85 but both used the same drive shaft. If the swing arm looks correct then just the diff was swapped out. I don't think there are any numbers on them, but good photos of it might help id what it is.

I know some people have used the trx250 rear in the 250es, but I'm pretty sure the diffs are the same more or less. The swing arm is much different though, it would fit on a 250sx frame for a +3 inch in length.

It kind of looks like this one, but the spline count is off. http://www.ebay.com/itm/03-Honda-TRX250EX-Rear-Drive-Shaft-/171975483892?hash=item280a89a1f4:g:QT8AAOSwwbdWJ6a O&vxp=mtr

Is it welded together at the knuckle?

The easiest fix I can think of is to get a 250es or 250sx rear end and use the 250es drive shaft, but the rear ends are not cheap. I'd like to help ID the diff you have, since it might open up a new possible rear end for the big reds which is why they cost quite a lot, they get torn up and all that is left is other ones used from the 80s.

[gman0201]

Also need full plastics for 86 trx70. I found on Amazon for around 400 bucks...anyone know of a better deal? Seems pricey for small plastics.
I,seen Mr twisted had plastic for a 70 and a 90 brand new back ones for around 190 I think on ebay they,had all types of color

[jeffro95]

On the hunt for an 86 tecate near Chicago to add to my collection. Anybody know of any for sale?

[PastorB]

I am looking to purchase a decompression cable for an 85 ATC 200s. Any help would be welcome. Anybody know where to buy one of these? Thanks.

[Jeromey]

Ok ty ill be looking for parts and see if anyone is in alabama

[ps2fixer]

At the 3 last posters, it would be best to make a new thread about the things you're trying to buy, it will be read much more there than here.

[ATC_Bros]

its the RULES don't like them there is OTHER Forums out there BUT NOWHERE has the QUALITY of USERS and INFO this site offers, So for i will wait the 2 months and i already have more then 10 posts so im good................was posted as and answer to an above issue, my bad....opppps

[alt]

Definitely answered a few questions haha much appreciated

[250ES5984]

Answered many questions. I've been a member for a long time, but I didn't know about the 10 post requirement for full access.

[BANSHEE CHAOS]

First post here but it's far from the first time I've posted on forum ... I understand some people are illiterate and never learned punctuation... Spammers are out there too. There are also folks who legitimately need a quick solution to a problem. I've been there before. I'm too old to get in a hurry about bs nowadays.

[BANSHEE CHAOS]

I'm also forgetful... I was gonna answer a question for somebody and then was informed 10/2 rule... I can't remember who, what, or where now...

[SX250FATCAT]

Ive been a member here for a long time. My previous user name was BIG_RED-ICULOUS. I had to change my email when I got married and I forgot my last password. Tried sending a message to admin but no success, so i had to rergister. Would any of the moderators help me out here please??

[Hutch08]

Hey, Tried posting my first thread in the "new members" section... says, Successful but I can't view it after posting?

[BANSHEE CHAOS]

I want a Tecate... 85-87 preferably. Or a Tri-Z.

[BANSHEE CHAOS]

Any 2 stroke 3/4 wheeler actually. I've got a complete Yamaha yfz450 minus the motor. Thinking a yz490 could possibly be a donor engine for it.

[BANSHEE CHAOS]

16th post.... Whoopie... Not full posting ability yet.

[bradkeskey]

Adding a post. I wanna show off my cycle country plow I just got hooked up!!