Need some help....

[dream3wheeler]

Go to take my wheels off today to do some swapping..... got 3 of the 4 nuts off of the hub and the last one is stripped out completely. Not going to lie i tried getting the darn thing off for about 45 minutes before i headed back inside. someone tell me how i can get my tire off.. Any help will be very much appreciated! thanks

[captainweezy]

Sears makes a kit for exactly what you need. Mine have been true life savers. You tap them over the stripped nut and then you have a new fresh socket head like 3/4" or 15/16's, Put on an extension and you have it. You may need to use an extension of some sort to tap it on the nut because of the wheel width also. I hope this helps.

[chuckiedog04]

heat it up with a torch and the grab it with vice grips and see if you can twist it off.

[HONDA_ATC_FREAK]

I have a nut brake it works good if you have the room to turn it. That or a torch works good, dremel with a cut off wheel, if your good. many things really