sweetip2000
11-17-2011, 11:27 PM
I replaced both fork boots without taking off the wheel.
I could not turn the nut on the axle. I was giving it a few good hits with the socket wrench and even a close end wrench, It didn't budge.
Then I couldn't get the front brake cable removed where it is attached to the outside of the brake drum. I had to disconnect cable from brake lever.
The service manual can be very general at times.
Any help to a newbee would be appreciated.
Thanks
I could not turn the nut on the axle. I was giving it a few good hits with the socket wrench and even a close end wrench, It didn't budge.
Then I couldn't get the front brake cable removed where it is attached to the outside of the brake drum. I had to disconnect cable from brake lever.
The service manual can be very general at times.
Any help to a newbee would be appreciated.
Thanks